Outer Limits 4x4 Board

Hi all, My AC belt started squeling today so i popped the hood to check it out and found that one of the bolts holding the AC compressor to the motor is missing. Anyone know the size/thread? Can i grab an 8.8 from the local bolt place or does it have to be a nissan specific one? It doesnt look like ...

Im not sure of the official capacity, but from empty i can fit about 80 litres in mine.

Looks awesome mate. The steel for your sides, did you have them bent up or can you buy steel already with that profile?

I want to re-route my fuel fillers so i need a length of hose with a 42mm inner diameter. Ive tried purple pig and enzed with no luck. Anybody know where i could get some? Im assuming this has been done before, how did you do it

Thanks

Awesome!

Has anyone had any experience with the cheap chinese (im assuming) turbos you see on ebay? Such as this one? http://cgi.ebay.com.au/T25-T28-I-G-Turbocharger-4-SR20DET-RB26DETT-VG30DETT_W0QQitemZ170336192926QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item27a8d4099e&_trksid=p3286.c0.m14&_trkparms ...

I bought a set from wombat in ringwood about 18 months ago. Sorry, dont remember how much they were.

Looks the goods mate. How much did it cost to get those tray bars made up?

thanks tropey, thats the sort of info im after.

Im basically just interested in the mods, how well they were done etc and how much off road work it has done.

Cheers

Has all the fruit, just wondering if anybody has any information about it??

http://www.graysonline.com.au/lot.asp?LOT_ID=3152915

I have some rusted, smashed up sils on the old mk. Im thinking of replacing them with some rhs like the communal wagon in this thread. http://www.outerlimits4x4.com/phpBB2/viewtopic.php?t=104755 I was wondering if its a bad idea to put some braces from the sils back to the chassis to create sliders ...

I have had a search and cant seem to find a definate yes/no answer on this question. Will an Arb locker for a GQ front (H223B, 31 spline, 32mm shaft diameter) swap straight into the rear diff housing of a MQ (H223, 31 spline, 32mm shaft diameter)? The measurement came from the arb website and look ...

Pretty scary to see half a bull bar flying through the air!!

sweet, thanks guys!!

Dunno if its for the sway bar. Ive attached a pic.



Looks like a shock mount but i could be wrong

Been looking at getting some new suspension for the old girl and i was poking around under neath today a i noticed that next to the existing shock there is mounting points for a second shock. Dont know if this is standard or not? Does any one no what it is for? Is it for running 2 shockies on each ...

Thanks for that!

Hi,

I just took my MK in to get a road worthy, and the mechanic just called and reckons he cant find a chassis number? Does any body know where abouts on the chassis it is located.

Cheers

I had a subaru one in the last 5 patrols I had - beautiful wheel.

Patroldude, which subaru wheel fits? And does it fit on a MK or GQ?

Sweet thanks.

playtime 4x4 wrote:Guts, try the swap meet out in Werribee on Saturday 24-6-06
Dave

Sorry if im hi-jacking this thread, but where and what is this swap meet you speak of.... Is it a fourby swap meet?

I think you want to do a SOA? (Spring over axel) Check the bible and do a search. There is heaps of info on SOA's

Cheers

MK's are negative switch i think??? Yep - posative is always on, it's the earth that gets switched on/off. You can still use it to switch a relay, just wire one side of the relay's coil to +, and the other side to the switched negative from the high beam. Yep, negative switch, but i had to go a bit ...

Ive searched and searched and cannot find a thread covering this problem so here goes. Im hooking up some spotties in my MK patrol. Used the wiring diagram thats been posted in a previous thread from the land rover site i think? What i have is a 3 way switch that has on/off/on with high beams. All ...

If your still looking... 100 bucks on ebay...

Looks like it is off a LWB.... dunno if it will fit?? Maybe someone else does...

http://cgi.ebay.com.au/Nissan-Patrol-wa ... dZViewItem

Ok cool, thanks heaps guys. I think ill grab the whole engine.

Cheers

I was in my local wreckers today and found a 83 Datsun 280C with fuel injection. Ive done a little bit of searching on the web and found that it is also known as the Nissan Cedric, and has a L28E. Now what i was wondering is if the fuel injection would bolt onto my L28 in my MK? Thanks for any help.