Outer Limits 4x4 Board

I have heard of these YURI hardened CV's.
What sort of dollars are they worth??
Did u supply your own CV or buy off them already hardened??

Just a quick one, the treated CVs wouldnt be hardened would they? It would make them more brittle. They would be "softened" to make them tougher, but wear ...

You can either send your to be done or he can supply brand new and modify them. It is some time since I got mine but they were about $600 for the pair of brand newies to my door. Not bad when chromo's are $1000 more plus.

Dave

stressed wrote:i went with yuri harden cv for mine gq

Yep me too and I have done the last nissan trials, willowglen and many other hard trips with the club and have never broken one. Yuri do a great job on these.

Dave

I have 37's and 5" lift and clear 2.1 in the car wash. But the wheel washers don't reach the rims!!!!

Dave

turbo gu wrote:

thunder wrote:

Mid73 wrote:there will be soon

i hope so as the rumour that i heard is its off.
this has come from members of the nissan club.

So come out and tell us whats going on so rumours dont grow.

The President of the club will release an update in the next week or so.

So what's the go?

Dave

could a droped rear arm be developed like the front droped arms

so it stays in line with the rails then drops down to the wheel





This is a question based on something I noticed on the weekend


With the long arm set up when climbing square steps the arms hit the rock edge and start to lift ...

Yep,I gave up using gaskets on diff centers a while ago. I just clean off the goo from last time and put a good coating on. There are no narrow oil/water galleries to consider blocking like on an engine part.

Dave

It seems you already asked this question???????????????
Didn't you?????????????

Dave

http://www.outerlimits4x4.com/ftopic162695.php

It looks good, but unless I'm missing something you only get a programmable controller in this. You still need a throttle body injectors and all other hardware to use this???

Dave

hey mate,

I've got the same issue with my mav. same engine as yours.

Drives me up the wall. using way to much fuel with no power down low and a but backfire or miss.

Anyways.

you can get the whole carby rebuilt.
I'm in newcastle and there is a company here called allcarby. they said it would ...

You can't go past the AU-BA-BF twin thermo setup..
Available new for as little as $100 if you look around.

Here's a set on Ebay for $165.
http://images.channeladvisor.com/Sell/SSProfiles/73000494/Images/1/FAU6010NAV-Maked.jpg
http://cgi.ebay.com.au/Ford-AU-Falcon-Fairmont-Radiator-Thermo-Fan ...

So I take it you have sorted the insurance woes that cancelled the trials this year???

Dave

I went for pricing information on the cal's cv's... Its going to be interesting to see how much the quotes are going to be for. They seam to be the best so far, and its one more thing im not going to worry about, as i really cant be bothered pulling the front end down in the bush -

I just want to ...

very simple to work out if yours are the correct size drop boxes, measure from the original radius arm hole down to the drop box hole , 100mm = 4 inch lift , 150mm = 6 inch lift or their abouts.
They only have to be close to that , but tire size does come into play, bigger the tire the less caster ...

http://i467.photobucket.com/albums/rr31/Mark696969_photos/Patrolsus1.jpg

http://i467.photobucket.com/albums/rr31/Mark696969_photos/Patrolsus2.jpg

http://i467.photobucket.com/albums/rr31/Mark696969_photos/Patrolsus3.jpg

Ah I got it. And yes, I know the angle's dont line up in the pic and its ...

I would love a set of 4.88 ratio's to suit gq patrol earns my vote.

Dave

Yeah thanks for that will check that out for sure.

DaVE

Hi all, This is both for info and a question.
I found that during or straight after a steep climb my engine would not idle but would run at higher revs, but if allowed it to drop to low it would stop again.( reel dangerous if it happens at just the wrong time).
So I changed the points and plugs and ...

I as well as many others use garden edging 50 bucks from hardware store and can be trimmed to the right width.

Dave

Maybe this could save you some work
http://www.outerlimits4x4.com/ftopic155074.php

try this one or google for it

http://www.ramblerman.com/blazer/gearcalc.htm

Dave

dose anyone know what the average for the Waterfall was in challenge class. We were driving the logs when Tony gave the averages, and needless to say, was not listening to him much at that time.

Thanks mate. Looking forward to it.

Dave

Can anyone tell me if I can get my truck in to the sites it has a 4m clearance???

I emailed CCDA and they emailed back my numbers. Someone else in our team said that they would have representatives there to join on the weekend, does anyone know if this is true?

can someone post a list of teams competing?

Pyrotech wrote:

MD4x4 wrote:
I am sure I saw a heap of Offroad Images photographers at the Trials.

Regards

MD

u may be right actully, i could be getting mixed up with Woodpecker, sorry, its pretty hectik this time of year

You can be forgiven. for that Greg

Merry Christmas to you and your family also.

kim
is that kristy on the back of the dvd n pics of fabian on the front??
did all our team make the dvd??

Right on both counts, and yes all the NLRC got a showing. I think this year they have tried to give even showing of all competitors, although they didn't get me on track 1 where I got 100 ...

Got the DVD today.....awesome, I think it is the best yet, and even the music is ok

hi teegan,
Already spoken to Kizzo, and yes she does have some great shots, but they are only her personal ones, not any of the official photo's. The official ones were done by offroad images. Can't wait till they come out
Kim