Outer Limits 4x4 Board

The hole in the middle should have 12 points. The head of the bolt has 12 points. The clip taps over the head of the bolt and prevents it from turning because the "wings" will hit the hemisphere. It's not uncommon for them to fall off. Poor design. As a general rule we clean the bolts heads with ...

Congratulations Muppet and Alan for their win!!!!!!

To DOD or not to DOD..... that is the question!

If you don't DOD then you Do don't dod but if you do dod the you do dont not dod. dodding is ok if you don't want to undod but if your not wanting dod then you must get non dod. if the dod is there it can be ignored unless you need to un dod.

dod it?

05- Hilux about 70

Badmav is correct. The detroit allows one wheel to overun the other but not be driven faster.

Check here http://www.eaton.com/ecm/groups/public/ ... 128312.pdf" onclick="window.open(this.href);return false;

Should be all the info you need.

Dan

We sell both Tigerz11 and warn winches. Value for money it's hard to go past tigerz11. As for the aldi special, Paul from tigerz11 has spent a considerable amount of time in china, at the factory developing the winch and ironing out issues that arise over time to the point where i think we finally ...

Watched the DVD on the weekend...
Sorry to say i think it was the worst cliffhanger DVD so far.
The narration was quite poor and infrequent.
There were no results other than 1st or 2nd..
Some lengthy, boring footage in places...

I didn't think it reflected the event very good unfortunately.

I would agree, sounds like too much fuel. I had the wastegate wired shut on my 1HD-T, peak boost changed from 15psi to anything from 18psi up to 22psi just by changing fuel settings, when it was producing 22psi, EGTs would climb extremely quickly So you had a waste gate issue.. not a fuel issue! He ...

Have you looked at ProComp Xtreme all terrain or Extreme muddy

http://www.flexitank.com.au" onclick="window.open(this.href);return false;

We used to run one of those in our comp truck.. did two cliffhangers, an outback, ateco and some engels without a drama.

I'd spend the dollars on getting the head done.. Low k imports are getting rarer but then i haven't looked for one lately. Once the head is off you'll have a bit of an idea of the bottom end. If you've looked after it service wise then 300 odd thou isn't too bad.. may just have quite a bit of life ...

Either would suitable. MN's still have a bit of a shortage of aftermarket accessories due to there relatively recent release although it's getting better every day.
Personally i'd take the triton, only because i like the ergonomics better.

Sounds rooted... I'll give you your 4 hunjy back and take it off your hands....

Hey Ruffy , sure is good to here your back home mate , all the boys from Adelaide have been thinking of you, Micks been keeping me up to date with your recovery as best he can. Very unfortunate accident mate, you must have been through hel and back. Great to here your recovering well, it must be ...

Simex do make a tyre tube that is stronger and thicker than most others on the market. HOWEVER.. If the side wall of the tyre is damaged right through then the tube alone will NOT be enough to make using the tyre a sensible option. Ultimately you'll need to get the sidewall vulcanised (which does ...

Well it was nice to come home to a trophy.
Still haven't seen the car, got all of my stuff or unpacked..

This getting back to reallity business is harder than it looks..

Yeah i'm sure GUjohnno will comfirm brand but i think his are trik.
I think the induro ones are a better design

Nothing to see here.. move on.....

Sounds very much like a faulty fuel pump. Being an EFI pump itcan have good flow with low pressure so you really need and EFI fuel gauge to check the pressure. If there is no fuel at all coming through then check if there is power to the fuel pump when cranking. If there is power then definitely a ...

DAVESGQ wrote:Hey guys. Just chasing info on where to buy a second battery tray from online? Thanks

What vehicle, year and engine?
different manufactures products vary model to model.. some piranha ones i wouldn't recommend.

Auto-Craft wrote:We work on 30mm bump stop crush, and normally, you set a vehicle up for handling using a 1/3 up and 2/3 down rule of thumb.

Pretty much the best general setup. Unless you've got some more unique requirement then this is the go.

Rhett wrote:Its not looking promising

That's a shame.. It was my favourite rig there amnd you were always in with a chance. Hope the outlook changes!

I can't see why you would go to the trouble of buying a ferret and a gauge when the currie does both jobs.
if you already have a gauge and just want a deflator then the ferret is as good as a stick!

Hopefully i can drive home from it though! Hey Ruffy - driving home from this one is the whole idea. BTW we have some unfinished business for you - a 4.5m vertical wall with 25 minutes of ground anchor work seeing you got out of it last time round... Yeah kinda got out of that one.... lol.. luckily ...

Love the sound of this.. A true survival comp... Will have to talk mick into this one.
Hopefully i can drive home from it though!

I like the way the good points of the jeep were highlighted with a slight forgetfulness to mention that a corolla has a stronger driveline and steering components. Slightly important in comp. :roll: :roll: :roll: :roll: :roll: Don't roll your eyes.. it's a valid point. In stock form they're a great ...

I like the way the good points of the jeep were highlighted with a slight forgetfulness to mention that a corolla has a stronger driveline and steering components. Slightly important in comp.

The ARB EZ deflator is a copy of the Currie EZ deflator i believe. Don't know how much the ARB one is but the currie USED to be cheaper by a few dollars.

Heard Mick magher's navy was air lifted to Sydney hospital. Rubber hose that went through the cab under his seat to back radiator burst and burnt him very badly. Hope he's ok. yeah thats true, not sure about the air lifting bit though. Scrutineers weren't happy about the hose running through the ...

Little bit of mud won't hurt you Ruffy, as I remember you love mud, sometimes taking the time to sit down and really enjoy it. Have fun and make sure he looks after the car a bit so it can go to Ateco! mmmmmmmmmmm.... mud..... :? As for Ateco... pfffftt... That's not my ride.. i don't care!!!.. We ...