Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Search found 5 matches

by Alandra Auto Elec
Wed Mar 29, 2006 1:45 pm
Forum: Ford / Mazda / Daihatsu / Homeless
Topic: Increased consumption !!!
Replies: 11
Views: 592

to check the coolant temp sensor you can do it 2 ways, the hard way and the harder way. 1. locate temp sensor under dizzy, easiest way from under the car. unplug the sensor and check its continuity. i'm not too sure what that resistance reading should read i cant remember. 2. Locate ECU, passanger ...
by Alandra Auto Elec
Sat Mar 04, 2006 3:36 pm
Forum: Ford / Mazda / Daihatsu / Homeless
Topic: Increased consumption !!!
Replies: 11
Views: 592

yes it is screwed into the block. it is located under the distrubitor, it is the sensor that has two wires on it.
by Alandra Auto Elec
Fri Mar 03, 2006 6:52 pm
Forum: Ford / Mazda / Daihatsu / Homeless
Topic: Increased consumption !!!
Replies: 11
Views: 592

hi, Check your coolant temp. sensor. because if it is faulty it will give the computer a faulse reading (that is that the engine is cold) and it will keep pumping petrol in all the time (more than usual). Feroza's run rich when they are cold and then when the coolant temp sensor sends a signal to ...
by Alandra Auto Elec
Wed Jan 11, 2006 7:49 pm
Forum: Ford / Mazda / Daihatsu / Homeless
Topic: installing accessory cigarette lighter sockets
Replies: 15
Views: 390

Yes you can go straight off the battery. yes it does need to be fused or on a circuit breaker according to the current draw of the item being plugged in to it. (no fuse = big fire if there is a short circuit). it doesn't matter that it doesn't switch off just as long as you have unplugged what you ...
by Alandra Auto Elec
Wed Jan 11, 2006 7:43 pm
Forum: Ford / Mazda / Daihatsu / Homeless
Topic: Can I just swap in an applause Engine to my Roza?
Replies: 10
Views: 804

hi. yes you can put a applause motor in your ROZA,it should bolt straight in, all u have to do is use your own bolt on gear eg. injectors, intake and exhaust mainifold, fuel presure reg, etc etc etc....... I know this because i have done this to my ROZA and it all went well. Yes your are right ...