Outer Limits 4x4 Board

I heard recently that in QLD drawbar brake controllers are now non compliant and you need to have an in car controller, can someone confirm this?

Had the same problem when I had my disco. Research I did pointed to dirty earths on the starter solenoid and motor, when the car gets hot the resistance gets higher and there's not enough voltage to engage the solenoid. A cheap fix is to clean all the contacts on the stater and solenoid and the ...

G'day Dave, am I right by saying my defender 110 ute has a weight of 1800 (might be 1880kg cant remember) and I want to put a supercharged 4.6L (4554) rover engine in it it should be OK? 1800x 3 = 5400 YES WHOOHOO FINALLY :armsup: :armsup: :armsup: Hey DEF90 if only we waited we both could have put ...

G'day Dave,

am I right by saying my defender 110 ute has a weight of 1800 (might be 1880kg cant remember) and I want to put a supercharged 4.6L (4554) rover engine in it it should be OK?

1800x 3 = 5400

I remember having huge problems with this I run windos 7 and managed to get it to work (please dont ask me how)and I too couldnt down load it properly off their website. and becareful using a USB to serial adaptor mine (ECU) locked up and had to send it back to Haltech. Make sure you dont you a ...

starky wrote: yes you can use anything you like and you can also re-register the car. Stat rite off is only written off because the insurance companys deem it not to be cost effictive to repair but joe blow can repair and re register it. once you have it ready all you need to do is get a roadworthy ...

I ran these for three yeas without problems i just used stainless steel hose clamps at the top to hold the coil inplace and mounted the 80 series bumpstops on the bottom worked a treat. the only problem i had was when i went to remove them i had to cut them in half as they filled up with mud & sand ...

Thanks Kirby but I have been talking to them for years now ( they oringinally helped me with my project ) had it all lined up to get mine done like Andrews 90 single cab ute but the guy that did his stopped doing buisness plus after many thoughts its just too tight. The guy that did the roll cage ...

x2 Uniformed, Ive been trying for years to buil a comp defender but being a single cab there is no ROOM yes I know people have done it but I have sat in one and its too uncomfortable as you are too close to the steering wheel. I could not live with it especially if you in it for 10+hr days If ...

am I right by saying that a soft dash is a Dash out of a disco series 1? the one from WA looks in perfect nik always liked that model rangie good luck with the car shopping Ruff

My little girls first birthday dont think my wife would be happy if I missed that. This sounds awesome I would be there with bells on just bad timing for me is there going to be another one?

I have been trying to build one for 6years now and I am stuck on the roll cage I keep thinking about an extra cab but havin trouble finding someone and the correct parts etc. You can fit an internal cage but I am 181cm and its too cramped ( have sat in the british off road 90 ute ) exos are not ...

Ring Capa they do rover kits mine is a powerdyne supercharger it bolts on the side and has low boost which doesnt work with an intercooler total cost is around $5000-$6000 depending on what you want you can do a valley mount blower (sits on top) but there is problems with matching them up I think ...

This was my old man ute 4ton towing capacity but you would need to find a TD5 and put a chip on it to get any decent power out of her and for $20,000 you might find one in good nick

I went for a drive with a 7L hemi JK if I had that sort of coin I would seriously think about it

http://www.youtube.com/watch?v=iKTjLjQaWcc[url][/url]

My old man put one on his toyota rv ute 2006 model didnt do a thing cost around $2500 installed cant remember the company but the guy told us the government was looking at giving him a grant for more R&D anyway months and months went by nothing changed so he kept complaining and all they kept saying ...

Sam is your car even going I think we need to have a race am interested to see difference in motors mine stops making power at 5000rpm

X2 peter 110 I have had that happen to me I was just taking off from a roundabout very gently and BANG no more drive. good luck with the rebuild

Rolly another reason why they do this(shudder lack of power) is when you change the fuel filter or run out of fuel the fill her up and restart the engine you need to unsrew the bleed screw on top of the filter housing and run the engine and wait until the air bubbles have stopped then tighten and ...

Does your car have the standard land rover central locking car alarm with immobiliser same thing has happened to my old mans disco TDI 1998 manual and my brothers 1997 TDI auto. sounds like the engine immobiliser could be playing up you can buy a bypass plug (link cable or something like that ) that ...

Good luck everybody hope it all goes well without any hiccups and go the logan districs team

http://www.v8engines.com/engine-3.htm#supercharging[/url] I remembered reading about this years ago these guys know their stuff and they also have an ebay store I really wish I had $20,000 to spend these engines are horn. make sure you read about the warnings of supercharging on this link. I have a ...

Come on they arent that ugly these rims have been around for years very strong they were made by Performance wheels dont know the story did staun buy performance? They do look better without the centre caps http://i74.photobucket.com/albums/i276/Hally-photo/eea103b4.jpg http://i74.photobucket.com ...

Sorry to bring up an old thread but is their any progress on the fibreglass copys? or does anyone know how much a brand new one is?

Yes x 2 on the slipper spings. have had many problems with this on our box trailer I now run the rocker setup

Here is abit of info about the bags I have just installed them in the rear and aparently some guys are running the same airbags in their GU's http://www.outerlimits4x4.com/ftopic160378.php

LOL this brings back memories I had so much drama when doing a body swap I used a written off defender chassis and my old existing cab you can use a written off vehicle as spare parts as the chassis was fine but however i did have to get a surregant vin number stamped onto the chassis good luck

Hey def90 I think My radiator was custom made I will do alittle searching to find out who made it as british off road got someone to make it for them as for temps slow speeds high revs on the beach all day long and the gauge just sits below half and does not move at all the only time i had an issue ...

Edit:

well thanks to bush65 for all his research I got board and impatient so I went down to the airbag man and bought some rear air bags 1T14C-8 bellows but they would not swap the pistons :bad-words: and if i want to change them to the 9778/NAD-18053 units it will cost $70 :bad-words: . so I will just ...