Outer Limits 4x4 Board

i work for a bearing shop.. will get them for you tomorrow.. but buy the time he brings them back you wont be saving all that much! Thanks for doing that Red_zook much appreciated! if there is a full bearing listing i am going to get as many as poss for future use :D also he isnt flying he is in ...

hey guys i am chasing a bunch of NSK bearing numbers as a mate is over seas and walked into the NSK manufacturer warehouse and mentioned that they are a lot cheaper than here. that being said i am chasing bearings numbers for the following: * 86 NT Transfer, wheel bearings, diff carrier etc. * 90 ...

anchor ratchets sound like the go


quick release

vicelore wrote:well its driving again i just took her down for a bath.


thanks for your help guys

have you replaced the engine mount mate?

does it click or just nothing at all? spewin mate

they are cheap as.. like 30 bucks? replace it mate safer than sorry..

nice one! the weather will play a part as well of course.
i tried running mine on the gtech but have forgotten the outcome by now. ill run mine again so you can have a standard 1.3L figures as well with extractors..?

ill get you some pics of my mates zook. he has 4 leds in a rounded piece of perspex (one in each corner of the beast. he made me some up and they look sweet. mine are yet to be installed. i also picked up a rechargeable 12v LED light. it is great! runs off 12v or 240v (adapters included) or ...

also check if it includes fuel pump etc.
when i was asking about a kit over here in Perth they said yep full kit.. but when asked about fuel pump they said no thats extra :S full kit my a$$!

nice work mate i am looking at doing something like this.. i may have to copy ya keep the pics coming!

i would spray them with that black spray paint that when they arent illuminated they look solid but still allow light through.. ill try find a link for the product

ones without tacho are pretty much completed also. price all depends on how much the printer wants to charge me in the morning :D.. then postage. once worked out i will let you know. PM me your post codes and ill start on that side of things also. i am also toying with printing onto plastic but cant ...

thanks mate. i have also made them blue faced to see how they look. i tried using your scanned in images but they ended up being slightly to large and the contrast was out.. i dont have skills to play with em so i ended up redrawing em from scratch! took many many many hours :D i had to learn a few ...

ok heres the screenshot of the nt with tacho gauges that i just finished.. these are set to 235s i think.. :) i have test printed these and adjusted them slightly as they were a bit too big.. now they are sweet.. now i just need to print the final copy :P http://img126.imageshack.us/img126/1390 ...

would be good to pillage the EFI setup off some wrecked ones and ship them in hmmm

thats so cool mate! i would be making big enough to squeeze in their myself!
keep it up and keep the pics coming bud

Just checked my missus' vit and found the water level was way down (took about 1.5 litres to top it up) and the overflow was bone dry.
once filled up the water level seemed to pulse. i am thinking there may be a blockage somewhere but cant be sure.. anyone else experienced this before?

ta mate will do that then

nitrogen would be the go wouldnt it? doesnt expand with heat as readily as co2 and o2? i may be wrong

hey guys, i am installing two cig lighter outlets in the back to run a cooler/warmer for summer driving and also another for just charging my jump start pack (used for lights when camping) my question is should i run power to each allt he way from the front or can i jumper the power and earth from ...

well for starters if they are in word they will be pixelated (not smooth) and come out looking ordinary. vector graphics arent pixels and are smooth. the file format can then also be taken to a printer and they can print without needing to convert etc.
either way its your choise mate.

hi mate cool yeh i wasnt sure if you had created them or not. PM sent.


still need some peeps with GPS and different gearing and tyres etc..
use this thread to put in your findings or pm da13ro or myself.

cheers

ok heres an idea. i am currently remaking the dash gauges. i will make the templates for now. (they takes ages) i couldnt use the scanned in ones as easy because my missus just advised that once printed you would see all the pixelation. so that being the case i am now re-creating them in vector ...

bare with me still trying to find my photos of the 1.3 and swift starters (and their differences)
I put the swift internals in the sierra housing and it all went it sweet.

thanks Kyle for scanning those in mate! much appreciated.
I am going to just modify those a bit and see if i can get them printed onto some form of sheet plastic (signwriters or something).
will see how i go.

http://www.outerlimits4x4.com/viewtopic.php?t=101259
just done a quick search and thats the link i found.. few other links in the thread also.

seen a couple ideas Ammo box as per smilysmoke I have two options for mine i made a custom 6-9mm mdf wood one with padded top nice and deep. or one of the $30 coolers from dick smith. Can get pics if needed Nic i bought one of those coolers as i gave my waeco cooler to my bro for his drive over ...

here is mine.. ammo box cost like 12 bucks from disposal store cup holders were 3 or 6 bucks each from crazy clarks.. few rivets and a cut out of one of the cup holders to fit over the old grab handle that i ripped off the top of the box.. fits nice behind the handbrake oh and i used the dremel to ...

i had a mate over 140kgs sit in passenger side.. he was a big boy but still fits.. kept grabbing some leg instead of the shifter when going for first was awesome haha.

i vote you do some searching. i am pretty sure there is a ton of info in the general section.. ideas from a garden glove with finger tips cut out to tupperware containers have been suggested...