Outer Limits 4x4 Board

1MadEngineer wrote:there is easy ways to do this, and can be done neatly and cheaply!!

~13l/min is easy, A well setup OE pump can flow 2.5-4GPM @1500 psi.

PM me for a few ideas

PM sent

Hi guys, I have bought myself a hydraulic winch but I don't won't to run it from the power steering pump. Does anyone know where I can get a power pack using a 12V electric motor driving a hydraulic pump from? I need a minimum of 13.25L/min @ 1500PSI.

Croydon4wd wrote: the blocks are already recessed from holden.

The VP block wont be recessed, they were cast with the recess from VR Series II on ie VR stroker in GTS

Thanks for the info John.

I'm doing a diesel conversion soon so I was just looking at different filters/pumps that were available and found this one. All I really want to know is if it works or is just a gimmick. Any info on its reliability and effectiveness would be appreciated. Another unit I found is the FASS, HD and ...

Anyone used the AIRDOG II http://www.pureflowairdog.com/ What are your thoughts?

What is the reasoning behind the difference in the front mounting arrangement of the arms, ie why does the passenger's side arm have the bracket?

The factory temp gauge on my cruiser is fitted to the outlet side of the auto for a reason. The oil coming from the converter will be the hottest oil and this is what you want to know, slipping of the turbine and stator in the converter will generated emense heat and this is what cooks the oil and ...

The factory temp gauge on my cruiser is fitted to the outlet side of the auto for a reason. The oil coming from the converter will be the hottest oil and this is what you want to know, slipping of the turbine and stator in the converter will generated emense heat and this is what cooks the oil and ...

Alan, give Camshaft Engineering a call on 9444 7022, they are in Osborne Park. They may be able to grind up an inlet and exhaust cam for you.

Late model TD 80 Series

I bought a 3Gal (11 Ltr) certified tank from the Air Bagman in perth. It is feed from my Bushranger Max Air compressor. The tank runs my lockers and fills my tyres. A full tank will fill a 33" from 18-38 Psi in under 1 min with the compressor kicking in half way through inflation. Inflation is ...

Head over to http://www.offroad80s.com there is a couple of threads with blokes that have made their own which include pics that may help

I believe they are, I spoke to an engineer once and he had sugessted 33" tyres and 1" body lift so from that I'd say they are.

Also includes body lifts

Buy a VN computer, you don't have to worry about the security coding then. Kalmaker do an aftermarket chip for the Holden computer, have a look at the website.

How about free stuff for 80 Series

Chad, what is the electric set-up that you are running, I am only looking at running a 10500/12000lbs hydraulic winch on my 80 Series for touring, is there a pump that can be mounted off the side of the engine that will give adequate performance, something better than running the winch off the PS p/p.

If you are going to weld the chassis, DISCONNECT THE BATTERY and clamp the earth as close to the weld area as possible.

Anyone know what the flow of the 1FZ-FE PS p/p is?

beebee what is the pump you are running, how is it set-up?

I am considering running a hydraulic winch, what I would like to know is what pump set-ups are people running or what would be the best. I have thought about a power steering pump and using an electric clutch pulley off an A/C compressor so the pump is not running all the time, what are your ...

For info go to Australia and International Air Locker Applications.

ARB application guide

T = F x d or Torque = Force x Distance

To simplify what torque and power are here is a very crude and basic discription.

Torque of the engine is the force of combustion acting on the pistion rod times the distance from the longitudinal axis of the crankshaft.

Power = Torque x Angular speed

Here ...

Wayne,

Read this post http://www.outerlimits4x4.com/PHP_Modul ... highlight=

In the threat there is a post by Xenith, if you have any queries maybe send him a PM.

G'day Dave,

You could pick up an early 90's TD 80 Series Landcruiser for around 20K. Great tourer and tow vehicle but old with quiet a few k's on the clock most probably.

Thanks Slosh, it's a start. Trying to get as much info as I can at this stage.

G'day all,

Has anyone done this conversion, I would like to know in detail what is involved and what the approximate cost would be. If anyone knows of a contact that I could call/email it would be gratly appreciated.

Brad.

I had the same problem with my 80 Series, I had a balance line fitted between the air filter housing and the viewable side of the converter. Once this was done the system then required a retune, It now runs sweet.