Outer Limits 4x4 Board

Short answer.... it is not normal!

Any sound like that is a sign that something is not right. Sounds like excessive backlash in the main mesh if it is a significant noise. This would either be created by a worn bearing or some other part wearing out.

With that said, could be a small issue that ...

I have heard you can get gear sets from Bursons, otherwise you could probably get a gearbox company to rebuild it can be exxy though.

If you call around some gear makers, some of the smaller ones can knock them up for you pretty cheaply if it is a standard tooth size, etc. Although they would need ...

Yeah all these designs of twin head compressors have trouble with performance, they are great on the first tyre and then die fast after that.....

Stick with an ARB, Bushranger or something similar (quality and warranty wise)

If you read its comparo stats at the bottom of the page it drops from 150 ...

Can you go a set of BFGoodrich Mud Terrains in that size, they have a deal going at the moment, recoop the cost through the freebie....

http://www.bfgoodrichtires.com.au/

or have you tried an online search like http://www.lasoo.com.au/

If it is like the Rocky, it is the same stud pattern as the Ford F150 which off memory is 5.25" pcd. If it is the same they are a common size so it can help on price. Just double check offsets.....

It's on again . . . . .

The Bushranger Offroad 4X4 Clubkhana!!!
7th & 8th March 2009
Prizes and Trophies for Overall Male & Female
Held at “Willowglen” Goulburn, NSW

This will be the sixth year of the Bushranger Offroad 4x4 Clubkhana and as any spectator or competitor of this event so far ...

Cant help you with the width I am afraid but you an get IFS Rocky's too

It was my gearbox :cry: Transfer was replaced a few weeks ago :rofl:

I think it's the input bearing... It was being noisy last week, and yesterday I lost drive and it started making a loud grinding noise. :cry:

Hope I get away with a new bearing or two... not a shaft or gear :roll:


I think it ...

A locksmith should only charge about $20 for such a service, definitely worth a call.

PM sent bud.

Sorry about not replying with the extra information, we had pretty much sorted the problem after the first 2 days, but I was waiting for some decent k's to be done on it to confirm that it was fixed.

It was just the air-flow sensor on its last legs, just finally went belly-up during a batch of bad ...

Of interest... here are a couple of pics of a haflinger based buggy with a central pivot. It was on UK ebay about a month ago.

http://lh3.ggpht.com/pureredcordial/SEVW4C-VprI/AAAAAAAACD4/wAd9zWoQatQ/s800/2dc2_3.jpg

http://lh4.ggpht.com/pureredcordial/SEVXES8psyI/AAAAAAAACEs/x6W2WgvN2hs/s800 ...

BE careful with the removable handle, if it is not fully inserted into its seat when jacking it can crack the seat itself. This doesnt make it fail catastrophically but it does render it useless. Have only seen this happen twice but it is twice as often as it should happen.

Also, the 'Not suitable ...

One of the blokes I work with has a GU 3L Turbo Diesel. It has been running like a champion since he got it. He recently swapped out the fuel filter and he is now having alot of problems, he has done the fuel filter a couple of times before but never had this problem.

The truck isn't revving, it ...

www.tradingpost.com.au

it lists these two:

DAIHATSU FEROZA 1994, F300L 2dr hardtop 4WD 1.6L manual wrecking now parts from, $5.00

South West Auto Dismantler Austral
Phone: 0296069516 email southwestad@yahoo.com.au
Address: 125 Fourth Ave (cnr Of Seventh Ave) Gate 3 Austral NSW 2179

OR

South ...

I can imagine door skins would be quite exxy for them, parts wholesalers are charging through the roof on Daihatsu's atm.

Perhaps a replacement door from a wreckers might be a cheaper alternative...

All the aftermarket alarm systems I have ever had, have ignition barrell turn sequences to disable/enable different features.

This is also how the NRMA guys get past alarm systems when the remote control stops working. (sshhhhh trade secret......)

If you can find out what alarm system it is, you ...

Dont these tyres have a particular rotation direction?

bubs wrote:I went and got some spy pics

Sorry bud, I cant help, mine has a manual shift level but have you downloaded the manual from www.warfs.org

It covers both manual and pneumatic transfer cases. It may help...

Hope you find something on there

Just found these parts for sale, if I was closer I would have bought them already....

http://www.autotrader.com.au/iteminfo/adnumber_6935937_cat_Wrecking+&+Damaged+Vehicles_loc_locRZSQregtAVSCdistRZSQAVSCstateRZSQ9AVSCregRZSQ_off_5_sect_Automotive_sort ...

http://www.warfs.org/

has a forum but its only small atm...

Damn that looks like fun!!!!

I dont think I would try that without a 6 point harness though.......


But thats just me..

Fantastic, thanks bud. Am looking to raise mine in the very near future

This looks like a very strong way to do it......

Mate, luv the truck. Cant wait to see the next project!!

Quick question, searched the site n couldnt find this anywhere.

What model hilux leaf springs go into the F70?

Do you have a 5 speed transmission that will go into an F70 ???

I will put the hard word out to all photographers at the event, should be soon

http://i162.photobucket.com/albums/t276/Doc_acos/Event_1.jpg

The Bushranger Off Road 4X4 Clubkhana is on again!!!

On the weekend of the 8th and the 9th of March. Fantastic fun for the whole family.

For more information please visit: www.offroad4x4club.com.au/events/Clubkhana1.htm

Or check out ...

Yeah its all working sweet again for me too.

Must've been an issue, perhaps an id10t error

Thanks guys.

I have been having trouble today with the www.warfs.org website. Has anybody else experienced this?

or is it just me..... lol

Nice pics, makes me miss my Roza....