Outer Limits 4x4 Board

I have a '92 vitara SWB and the front wheels are not turning. I have switched the hubs to locked and changed the transfer stick to 4H and 4L. You can here it click into each transfer gear change but the front wheels still just sit there and don't spin. What should I be looking into to fix this. I ...

Are you meaning the part that holds the bottom edge of the back window to the top of the back door. If so is is a plastic rod about 10mm diameter by 1.2m that slides into the sock along this edge. You could pick one up from any pllastics supplier like alternative plastics in Melbourne.

I believe it to be a 1.6 was there a change in chassis and bolt hole when they moved to the 2.0Lt

Will an ARB Bullbar and towbar off a '92 carbie vitara fit a newer '97 EFI vitara. Both are 2 door and look almost identical. are the chassis and mounting holes in the same place.

by the metallic grinding noise and the very loose gear lever I am in need of fixing the gear box in a 92' carby vitara and was wanting to know if there are any options on better gear sets that will improve off road ability so that I fix one problem and improve the car at the same time. Currently ...

Has any one delt with offraod armour in the UK, as I want to know how much I am looking at to freight to Melbourne and also what tax or customs fees are added to car parts from the UK. I was mainly looking at the vitara winch bar www.offroad-armoury.com If any one has one if these bars do you know ...

Hi
Same problem in my car. The leaver stopped moving the latches as the cable gets loose so get your fingers under the latches while pulling on the leaver to release the catch.
Also try standing in the back so you can pull up on the leaver with more force.

On a stock '92 brumby what size rubber can I fit under it to give better off road ability.

Thanx

how do we get in contact with maria and does she have a website, if you know it.

take them down the street to your landramatt that way its not you machine that you f*#k

The foot well in my 92 Vitara is filling with coolent, mainly on drivers side but that is due to where I park. I have assumed that it is a heater problem, my question is what part most likely needs replacing and where would I get one from in Melbourne.

Thank You
Mr wet feet

Saw a serria on wellington rd today and we had a chat while stopped at several lights was hoping to go 4 wheeling some time PM me and we can swap details.
Vitara on 29s

Looking for a drivers side front 1/4 panel for a '92 SWB soft top vitara prefer dark grey but any colour will do at this stage.

SE subrubs of Melbourne.

trying to find out if old man emu or tuff dog is the better option as both are close in price.

I was able to fit upto a 235/75 R15 on a stock 92 JX vitara without any mods or rubbing so I would assume the JLX will have no probs with the size. Correct me if I am wrong.

If you can remove the bolt the mounts the light then take the bolt out and see the people at coventry fastners http://www.whitepages.com.au/wp/busSearch.do;jsessionid=64014e99b2122162aa98f7e639e9 and they can fix you up with tamper proof bolts and one way screw bolts, when used with locknuts (same ...

don't know but I would be fearful that they didn't look themselves as they are fitting them?

try some camping stores that stock sea to summit gear. http://www.seatosummit.com.au/showdetail.php?Code=A2LT it may only be 10lt but they take up very little space when not in use and cost around $25 but if you want a cheaper option use old wine casts, but you will have to drink the wine out of ...

I have a 92 vitara 2door and I was able to fit 235/75 R15 (29") muddies on with out modding. You will most likely need bigger rims as not all wheel fitters will but 29" rubber on the stock rims. If you check the for sale section you may find a set of rims with rubber if there is no big rush.

I am wanting to give my vitara a 1" body lift so that I can fit 29 or 30" tyres is this going to be enough as I don't want to cut the wheel arches or bash to much sh!t. If so can any one tell me where I can get a 1" or if needed 1.5 - 2" body lift kit in Melbourne and rough prices (if known).

I fixed the problem in my soft top vitara by building a wooden box that I then screwed into the same holes that hold the rear floor at the tail gate. I then covered the whole box with diamond plate rubber. The only way into the box is through the tail gate.