Outer Limits 4x4 Board

Yeah Mate they are a heap of crap. Mine went after 120,000kms mates went at 125,000. Its always fifth gear seems engine has got to much torque for the box. Very common problem ask any gearbox person.

Hope the leads help. Here is what I did. Get one ten year old son with skinny arms show him what you want done and tell him you will give him five bucks if he gets it on. Pick him up throw him in engine bay the hold on to him really tight so he is nice and steady you have to hold him around the knee...

On Gas? Seals in convertor can go. Heres hoping.

gq efi dual fuel. Correct leads unless you want to get custom made.

Cheers

Part number is Bosch B6104i. I knew that box would come in useful the wife wanted me to therow away!!

Cheers

Steve

straight in mate

Hey Mate if its your cnverter i have one lying around i went manual as gearbox became a powerglide. Its yours if you want it just arrange freight.

Steve

wont fit as holes have different patterns as for putting tb45 head on tb42 I don't know

Its almost like the saying if you need to know the fuel consumption you can't afford it. You have to remember these are a big heavy vehicle that will use a shit load of fuel. If you take it off road expect to double or triple fuel consumption. If you want economy buy a Corolla. If anything get a TB4...

Well it is the only thing that seems to break on these things.

Dont forget the two little bolts at the front of the head. From memory 8 or 10 mm. These are easily missed.

When I replaced my head three years ago used new bolts and a new water pump. You can never be too careful with these heads. Has done 123000 hard klms no problems touch wood. Who did your head reco?

Is it EFI or carby. If it is efi there is a bleeder nut on top of inlet manifold? Checked for water leaks anywhere else. Remember this engine is apperantly of Ford design you gotta expect this shit. My head cracked exactly one year after it was replaced luckily got it under warranty but had to fight...

Just done same thing myself. Costs were Gearbox $500.00 Clutch kit $650.00 Spigot bush $10.00 Flywheel $45.00 Clutch master cylinder $135.00 second hand boosted clutch slave cylinder $55.00 Clutch line $55.00 pedals $50.00 Transmission tunnel cover $40.00 plus sundry grease oil etc You have to bridg...

Need some advice. For some reason right hand headlight is not getting power on high beam circuit. The globe is fine have checked circuit and there is no juice in high beam wires at all. My question is it possible to tap into power at left headlight and run a wire to right headlight or is it better t...

Finally got to have a look at motor today. It is stuffed brushes are completely worn and one of the arms holding the brushes has a huge crack through it.
Anyone got a spare.
At least the window is still up

Steve

Had the same problem recently. Turned out to be a hose that would only leak while engine was running as soon as motor stopped leak stopped and as was spraying onto motor almost dried instantly so couldnt tell by inspection for water leaks. After saying that TB42 motor is renowned for cracking heads....

The sender unit is on the timing case cover. If you are looking at the engine front on it is on the lower left hand side.

Thanks guys

Have got window uo motor seems to have seized gave a spray of CRC loosened up enough to get window up. Does anyone know how the armrest comes off?


Steve

Can anyone help. Its pissing down rain and my leccy window is stuck in the down position. 92 GQ Patrol. Any recommendations on where I should start looking done the obvious fuses etc.

Thanks

Wet and pissed off

If it is a leather one I just had mine recovered for $60.00.

Steve

Thanks everyone have now worked it out. Does anyone know what stackers are compatible with this unit?

You were right mate it was power supply for amp. I'm now rockin after 6 months with no sound. Do you know if the extra plug on back of cd unit is for a stacker?

Had the same problem with mine was sd33t. It was sender unit on timing case cover. Try this first easier than taking dash apart

Does anyone now radio/cd wiring loom colours for a 92 GQ Ti?

Thanks

Just fitted one last week. At first was a little bit shuddery (a new word?). Have done 2000kms shudder is almost gone. Had flywheel machined AND balanced was tols this was very important.

Good Luck

Steve

Keep it going want to know all ins and outs as I have the opportunity to do the same swap. I have TB42e at the moment. Would love to use current inlet and exhaust. Exhaust is easy to change but how about all that wiring. It kills me every time.

Steve

You are right it is a Ti thanks for the ideas I'll give these a try during the week.

Thanks

Hi My original cd player in patrol has bitten the dust and seeing as I want a nice easy swap I thought I would try and fit a Gu cd player in all the plugs are the same but my Gq unit has an extra wire coming out of it and the corresponfing plug on the gu unit is blind. My Gq has an amp under front p...

I have one of these DO NOT GET ONE. A 2004 model 2.5 turbo diesel 130000kms. Performance is great but gearbox has crapped itself is now only a 4 speed no fifth gear. Ford know about the problem but refuse to do anything. This car gets me to work and back might tow a trailer to the tip and limited of...