Outer Limits 4x4 Board

Jeeparts in hervey bay should have one, but if you want a new one just get it from Rockauto. Would only be around 150 for the pump and strainer delivered and i think it was only 300 for a full replacement pump, sender and strainer delivered. Ive never had much luck with wooders on the late model ...

Yep,

Get onto Stu at Murchison Products. When it comes to late model Jeeps in Brissy, he's your man.

You dont have to stop with just the front bar either.

Think im going to miss this one, truck wont be finished till next week!

I have an 07, cant fault it. Make sure you lift it, the ride is better on and off road with aftermarket shocks and springs. And if you can get the quadra drive II transfer, electronic LSD both ends works great offroad. Mine is diesel and if you can get one do it over the 4.7. I have mine chipped and ...

Yep thats it, on my challenger i needed around 8mm of spacer to correct the camber.

I actually got it aligned, and they use multiple thin shims to get it right, then i pulled them out and made a set out of some bar steel. Stopped me breaking upper control arm bolts.

Dave

Convos look tops on a 4by too - i got mine from a jap importer of all places!


Dave

Hey Teg, Bit late, but youll enjoy the Challenger. Mine now has 240k on the clock, and still as strong as when we bought it (early 100k's). Bits for modifying it can be hard to come across, DIY is the method! My antenna also busted, but after constantly being barraged by tree branches on trails i ...

That link is great, but any up to date info on availability of these now?

Dave

Thanks All.

Dave

Hey All,

Chasing someone who can recommend an engineer in Brissy/Ipswich for a 6.5 TD chev conversion & 2" body lift in an 80. Preferably someone who has used an engineer to mod plate a fourby.

Thanks All!

Dave

Hey Rees,

Mate missed it by that much . It was advertised for 7500 though.

Dave

Thanks Fellas,

Dave

Test drove a MQ ute today - excellent everything, except I couldnt fit behind the wheel without a spatula to guide me in. Now admittedly it has after market buckets in it, but i didnt remember them being so small in the cab. I am only 6ft, but a pretty big bloke. DO other people fit into these cabs ...

Thanks Guys, The 360 & 727 were transplanted in 99 (and plated), and mated to the std 208 t/case, and still has the original diffs & 4.11's. (diffs were actually just overhauled by Hammonds). I took a look at the guards, and they have already been professionally widened 3" in glass matching original ...

Thanks OzJeeper,

Its actually got a Chrysler 360&727, not the AMC, which im pretty stoked about (Chrysler man from way back), i didnt realise that about the guards though, good to know.

I think ill be checking the ratios in the diff too.

Dave

Hey All, Im looking at an 83 J10 (cj10 elsewhere i believe). Apart from rust in the usual places for a CJ type body, what else should i be keeping an eye out for? Ive read that the steering can be funny on these, can anyone elaborate? Ive had a K20 chev before can it be as bad as those? What is ...