Outer Limits 4x4 Board

Im not sure what to do about the swaybar on my zook.

Ive just finished the yj spring kit and the sway bar is about 60mm from going back. Most would say that this isnt a problem but Im about to put in a 1.6 efi that I want to get plated and Im assuming the engineer will want the swaybar on ...

thanks guys

I thought it might have been for the auto.

I was thinking about ripping everything out except for the wires from the ECU to the sensors and then adding the supply positives from the ECU diagram that heath posted on suzinfo.

This is basically what I did when I put the V6 commodore ...

I got my 16B motor last week and Im slowly getting through the wiring loom.

Does anyone know where to get a decent wiring diagram for the EFI model?

Ive tried suzinfo and a few other websites and even bought a haynes manual(dont get one theyre crap). The haynes manual is more confusing than ...

Im in the market for a fuel pump for a 16B, Im putting the motor in to a 1L
stockman.

Im going with an external pump but Ive just found this link thats thrown me.

I was just going to buy a pump off a skyline or VL commodore, I think they run at about 14psi. This thread says I have to run one thats ...

Your right!

The mauriti should have disc front end.

Obviously they have been swapped at some stage.

I think i will chase up a price a whole new diff assembly.

too much dude.

I havent driven the car with the springs in it yet but its not that special.

It cost $600 american plus $180AU postage and then I paid $70 a spring.

Then it took weeks to get here and didnt fit my stockman.

This was probably my fault for not checking they were the same properly ...

Ive just finished searching for information on what I need to swap my 94 stockman over to disc brakes, to no avail.

Maybe we could add something to the bible.

It has 1L diffs and I would like to swap the front to disc brakes.

How much of the diff assembly do I need?

Do I need to add a vac ...

Hey redzook

how do you tell if its a widetrack?

Have you got this kit?

I havent looked at the front springs but I've just finished the back and they seem ok with my modified brackets.

Sorry Guys, Ive been busy....

The difference in suspension between the the stockman and the sierra seems to be that the rear spring mounts are not aligned with the chassis on the stockman. The spring mounts are a springs width towards the outside of the vehicle.

The kit is designed with a 'u ...

I recently purchased a kit to fit yj leaf springs to my zuk. I imported it from the states; Rocky Road Outfitters.

Does anyone know why it wont fit!

I have a 94 stockman and Im suspecting that the spring hangers are different on a stockman to a sierra.

So far I have only tried to fit the rears ...