Outer Limits 4x4 Board

Thanks Matty, we appreciate you jumpin on the boat How about we anodise the shock bodies Green to match the truck.

The DVD is awesome, congratulations to the productions crew.

The coverage is exceptional and with over 5 hours of viewing pleasure you're gunna need heaps of beer.

EFI or Carb??

mikebarnett wrote:hi im looking at putting 4.6 crown wheel and pinions in my 1994 gq what i want to know is will the 4.6 crown wheel and pinion out off a 1984 patrol fit .

Gday, I believe they wont fit and for $450 an end, why would you both using second hand??

Exedy part no. should be C6830HD should pay around the $650 mark, c6830st for Safari Tuff around $850.

Check output of reverse switch on gearbox.

Depends on what sort of work you are doing but Exedy for sure, spend a few extra bucks and get heavy duty, even for normal type use. If you want bullet proof go for the Safari Tuff Clutch and it'll probably last you forever.

I am assuming you have a patrol diesel (because of the section you have posted in), Toyota and Nissan diesel can take vastly different temperatures before other adverse consequences emerge. 550 Degrees Celsius is approx 1000 deg Fahrenheit and 550 degrees Fahrenheit is around 300 Celsius not much ...

Sad to see, you think with all that sand around they would have started shovelling sand all over it, wouldn't you??

http://www.break.com/index/4x4-truck-on ... crowd.html

Brian Kelley driving bruised banana at Woodpecker big nose wheelie and rollover.

http://www.youtube.com/user/mitchellbro ... OUuFbKg-jg

I just found this footage I shot a week or so ago and thought I'd post it.

4wd Mechanic needed for fulltime position in our Northern Beaches workshop. Previous experience and drivers license is essential.

7.00am to 3.15pm

Wages commensurate with experience - starting at $50k

Start end of Septmeber.

Please contact Aaron Mitchell on 9905 4764 extension 1.

We do have an answer for that problem. An offset allow hawse.




Will solve the ARB bullbar problem.

Shady wrote:Awesom pic

Thanks Shady, mate took it while we were waiting for a stage, onya Casper

Just thought I'd post a pic of the comp truck from last year

We got a high mount in the ARB low mount bar, we just added some extra plating up the front and a fedw gussets here and there. Its all good.

Hi All,

This is terrible news Wendy.

It is really the only event in the year that we look forward to being so close to Sydney.

I am sure we all hope that you guys will be able to rectify these issues and have a new date for us soon.

Thanks for all your hard work.

We have just sold a heap of Superline XD to competitors for the Outback, Cliffhanger etc, 3/8" x 200ft, which is about 60 metres, rated to 26500lbs.

Technically the body has no numbers so the compliance plates can be removed and fitted to another body with no effect to the roadworthiness, wagon to wagon, wagon to cab chassis is a different story, doing this to your vehicle will need engineering, reclassification and blueslip.
The vehicle will ...

ABC Bearings part number in fwnf00, that, I believe is the Koyo part number for the kit which is an excellent quality Jappy bearing.

We are currently seeking a reliable and honest mechanic to work in our 4wd Specialist workshop. Previous experience is preferrable but not essential. Permanent position available after 3 month trial period. Good communication skills are essential, above award wages.
Contact Aaron Mitchell on (02 ...

The major difference is the overbraid that protects the inner core, this overbraid also adds strength and abrasion resistence and excludes dirt, mud etc from entering the core and doing further damage. Does that answer your question??

Price list as follows

Length 5/16 3/8 7/16
Winch Line
50ft $174 $197
80ft $207 $265
100ft $229 $290
125ft $259 $334
150ft $285

Superline
50ft $253 $283
80ft $318 $376
100ft $361 $417 $559
125ft $415 $483
150ft $469

Superline XD
50ft $296 $335
80ft $385 $462
100ft ...

sierrajim wrote:The really funny thing is that most of the people who complain about how much things cost are the same people that complain they don't get paid enough.

Haha, thats me.

x2 x3 x4

How I would love to be making 60% on any items.

We also don't mind to help people out where we can, come and open up on Sunday, recover people who get stuck out the back of bumsville and because they went out on their own have no-one else to help, we also offer 10% discount to 4wd club ...

patrol42 wrote:it may be cheaper to buy the actual winch..but i think the shipping will negate any savings you will get..I cant imagine it woudl be cheap to ship a winch over.

And also the warratny issue which is quite important, Ateco Equipment will not warrant and winches that come in via grey import.

bot the cost of living and so on realy cnt be that different or syd wuld be vacant land.


As for the support the local bloke with his double priced parts, you would be a fool to pay double... Dont they teach commerce at school anymore? is it to just get the warm and fuzzys...?

Think what the ...

I learned my lesson long ago with buying 4by parts here (in oz), the mark up is bull shit. I save alot of money by doing everthing my self and sourcing parts from the states. Just an example my latest saving, I bought a pair of high steer arms(billet) direct from sky manufacturing for
$320 AUD ...

Is this the Nissan Section??

I guess its all relative, these guys aren't rippin you off, the cost of living in Sydney is higher than in QLD. You get what you pay for and when you think about the time saved by purchasing this crossmember of either of these guys rather than fabbing it up yourself.

You didn't ring us to see what ...

CLOSING DATE FOR COST WINCH ROPE DEAL IS THURSDAY 13TH OF SEPTEMBER