Outer Limits 4x4 Board

Your biggest concern should probly be rust where the outer axle seal is. But just clean em up and bang em in. My spares live on the back of a buggy, they are rusty it dosnt really bother me

Lots, it is going to be the biggest by far. Lots of southern buggys heading up

For those who haven't heard, the winter wheel is on again this year. It will be held on the weekend of the 5/6 of July. It is at city view beaudesert. There will be a pig on the spit Saturday night for 25$ a head. This also includes a momento and some other stuff. Normal park fees also apply.

I believe no gps this year (thank goodness) and tuff trucks are vs winch trucks. Rock crawlers and aus4s are in the same group. It is about 10ish km lap. That's all I know.

yes running two different ratios is ok within reason, no what you are going to do won't work for traction. 4.11 in the front and 4.3 in the rear would be ok but other way round wont climb. You can try and see how it feels, whats the worst that can happen? Just keep off the black top.

In a four wheel drive, with it in four wheel drive, you have no chance of the front and rear locking up in different times. They are linked together with gears and shafts. Unless you have a centre diff lock unengaged.

we are talking concrete assisted drawing yer?

every thing i have ever built has been cad designed. i first give it a sweep, then try and find some chalk. then just draw ot up till i like the look. i try to do it in one to pne scale to get the full picture but sometimes i run out of shed space.

Mine is a zex kit. best efi kit you can get imo. I also ingauge mine at very low rpm, fully aware that it is doing detremental things but it will pull the motor through into boost instead of stalling. a stock 16b will not run 75hp for long either, but it will be great fun while it lasts.

it seems i have 1.4 less litres of motor and 6" less of tyre size than the next smallest buggy. i like the odds.

it is not the lite wieght that causes the hopping. it is the fact that they are designed to carry a load so the leaves were built for that, hence no travel unloaded. Yes weight equals traction, but a light rig dosent need as much traction to make the same climb. Traction also busts stuff. So in ...

a sr20 aint all that light, only a few kilos between them a commy motor. vitara motor is a lot lighter.

There were no rock crawling buggys there. Only two all terrain buggys.

I think the whole point was to put only the one class. I like the one class thing, after all there can only be one king

I dont think the winch walls were too big for the buggys, i should have just put enough string on to get to the top. rocks were only rocks not boulders, when you can fly through it on worn out 33" tyres without the navi getting out you know they aint big. We only had issues with reading the gps ...

i didnt mind the one track a day induro style. just need to practice gps'en. MAnaged to finish second with very minium troubles. not bad for a toy truck.

it is a tight squeeze for two over wieght blokes in the buggy. gunna be cozy.

?Gave the buggy its last run before next weekend. racked up a quick 20km. Its all going good just need to put some new leads on and pack tools

no nos?

the 17"s had some issues and i dont know if they have resolved them yet. But the 16s are good. I was the first in the country to get a set and the havent lost a pound of air yet.

i tried nominating with my mb number and it said not valid. is there somthing im not doing right. (il get jen to have a look when i get home she will work it out no doubt)

A transaxle buggy will work much better with air shox will be far better than bike gear and bike forks, for a crawler. a off road go cart bike gear would be the choice.

So who am i going up against? changing transaxle ratios this week to squeeze a couple extra kmph out of the micro.

Do you have to use red to outline the things you must do? it makes us rangas sound aggressive.

mine is all 38.1 3mm wall, pete. if I was to bring it back to tuff truck I would have to just replace the B pillar? That is how i read it please correct me if im wrong.
Cheers Rhett

cant really rember. was about 4 years ago. i better go do another skid to jolt my memory i remember now they poped the concrete floor

they look like they could be mine issue ones

you can get gromet mount 50mm ones i think hella do them

amber ones
red ones

some 5mm rub rails on a set of half doors i done for a mate
http://i80.photobucket.com/albums/j199/rhettus/suzi146.jpg
http://i80.photobucket.com/albums/j199/rhettus/suzi147.jpg

another set of half doors for another mate with cup holders
http://i80.photobucket.com/albums/j199/rhettus/2011-06 ...

http://i80.photobucket.com/albums/j199/rhettus/2012-06-25081334.jpg
a artisc touch with the welder.

I got a front out put graphted on the rear of the case for rear dissconnect
http://i80.photobucket.com/albums/j199/rhettus/transfer003.jpg
So I cut all the speedo drive and stuff out and cut up ...