Outer Limits 4x4 Board

yeah will be there, meeting group at lavis servo at 8.30am sunday, looks like its going to be a nice weather aleast hopefuly not to hot.

yes thanks to all ,got the gear box fully rebuilt that sorted the problem as the selector shaft rod was broken so when trying to engage gears the top linkage was turn but not moving the selector rod internaly .

i have a 350 chevy in our ski boat it did the same thing all it was ,was a spark plug lead not firring properly but yet i had it checked by auto shop and it wasnt picked up ,a guy from a another ski boat picked it up one night when i was flushing the motor may be thought ?

cheers hamish

if brake piston seized on them the tyre wouldnt rotate when jacked up to check after its happen, i wouldnt of thought that as im not using the brakes at all when it happens .and you can hoist the car up and do the same runing time on a hoist and it does the same thing you hear a grind noise then the ...

have had the same problem but was caused by the head light leaking water in when driving through ,does your lites mist up on hot or cold days internaly on the glass this also causes them to crack, poor seal of the lite at the back where the globes fit cause the problem.it still happens with the ...

i have a 93model landrover discovery and have a metal grinding noise coming from front left hand wheel and the wheel locks up after ten minutes of driving, :bad-words: has new front wheel bearings, fit correctly with the 2 stage torque setting done wheel spins freely when jacked up to check if ...

it doesn't seem to work in anything 4l, 4h or 2h gearbox not engaging when going into gears. I don't have a body lift either to blame yet

I bought an automatic CJ7 selecting gears but nothing is happening has plenty of fluid. I can't hear or feel any bands slipping but car still not moving. Has anyone got any ideas!!!!! could it be a pump.

ended up buying auto jeep instead so dont have to worrie about the cluch
thanks

thinking of buying a wrangler but clutch feels like it needs replacing
would it be a hard job ?to do my self and does anyone know a rough cost for one,i have done toyos ,landrover clutch replacements without any hassel, would a jeep be roughly the same ?

cheers
hamish

trip is at awaba meeting at freemans water hole at 9.30am hope you make it stacey
i might need snacthing out alot as only have standard tryes but should be fun

I was reading on a USA magazine that a guy Mark Ritter fitted a lockright locker to his 1994 discovery just wanted to know if anyone knows what lockers we can put into our 1993 discovery or if we can put lockright into ours aswell.

anyone with info!!!!!!!

Cheers

tractors run water in tier tyres to to keep weight to the ground when on angles and for more traction, i have talked to some oversea guys and they all run 1/4 water in thier tryes but are all on alloy rims they made up a hose for thier vaules and used a remove tool to put water in.