Outer Limits 4x4 Board

The only other thing that I have not had a look at is a broken main leaf in the front righthand leafspring :?: Ray yeah those little bits of info sometimes help. A broken spring will of course throw a lot of things out of alignment and be dangerous. Also sagged springs will cause this too. How long ...

adam penfold wrote:i think that might b ur problem

i will investigate further and see what i come up with

thank you and everyone else for your suggestions


Ray

howed ya go buddy Hi Adam I checked the wheels and they are all the same, I checked the body alignment with the chassis, same on both sides front and rear, checked the ubolts and distances to the backing plates,all equal. The only other thing that I have not had a look at is a broken main leaf in ...

adam penfold wrote:easyes way 2 tel ifur rims are yota it will have a deep dish and nissan have a shallow

thanks for you help Adam I will check it out tomorrow and see what I come up with

adam penfold wrote:umm has it got a lift are ur shackles bent or springs twisted

no lift and everything seems straight that i can see

adam penfold wrote:have ur u bolts come undone and moved 1 way iv seen this happen in a cruiser

Adam I measured the distance from the ubolts to the brake backing plates and it is equal on all wheels

ozy1 wrote:what about body on chassis alingment,

hi ozy 1 how can i check the body alignment, I thought that if the springs where an equal distance on both sides then the body would line up through the shackle ponits connecting the body to the springs

adam penfold wrote:are they nissan or toyota rims due tue yota rims are wider

cheers adam

hi adam I dont knoew there does not seem to be any numbers on them or any writting at all

I have a 82 mq swb with 31x10.5x15 tryes, if you look down the side of the vehicle from behind the tyres on the lefthand side protude past the guards (front and back) by 30mm, while the righthand side is only about half that distance. i have checked the distance with a straight edge to the hubs on ...

thanks

I have searched through the auto electrical and the nissan forums for info foud some but not what I need. can anyone post step by step instructions on how to setup a electronic distributor on a L28 engine. I dont want to use aftermarket parts. I want to use parts from some compatable type of nissan ...