Outer Limits 4x4 Board

cheers for that, so if i wanted to fit the larger rotors and calipers off the later model is it a bolt on upgrade or is it a big job, being a larger rotor does the later model caliper just bolt onto the same holes that i have now and accommodate this larger rotor?

i searched this website for slotted brake rotors and found a large section on this, apparently you can fit 100 series pads straight into an 80 as long as its after 08/92, they have a larger surface area and apparently work a treat, the problem i have is my vehicle is an 08/92 so its right on the ...

thinkin bout fitting slotted or cross drilled rotors to the front of my cruiser just thought they might get filled with mud while wheelin and end up being a nuisance, anyone got any experience with this????

does anyone know of anyone who is producing these for a good price and of good quality, it seems hard to pay arb their extortion prices for steel, any help would be appreciated, cheers...

been getting a tink-tink noise coming from the under carriage of my cruiser for a while now and can't seem to find what it is, it happens when i take off or sometimes just when i accelerate, it doesn't sound like a missing gear anywhere in the system and the gearbox, centre diff and front and rear ...

looking for a wheel carrier without spending the big bucks of an ARB rear bar plus wheel carrier, its gotta hold a 35" MTR, i've seen a couple on ebay which can fit to the body as a swing away, has anyone had experience with these while running 35's?, any other not too expensive options??

mate of mine is lookin for a sahara but he's not sure what other options it has on top of a gxl eg. long range tanks, dual batteries, interior upgrades etc also what year where they made up to?, anyone know what a blue marlin landcruiser has?

cheers, those calbah links are no good?

thinking about doing this mod to my 80 any of you fellas done this at all and would you have photos to post to give me an idea of what to do, cheers...

want to fit a lift pump to my rig but am not sure how much improvement it will give me also i don't know what type is best for this engine e.g. psi and where is best to fit it, any of you fellas got any experience with this?

can you buy those dump pipes off the shelf or is it easy enough to fabricate one yourself?

hey simo does your pipe go all the way to the back or dump before the diff??

any of you guys tried out different exhaust systems on your turbo cruisers was thinking of a 3" dumped before the rear diff but heard that they lose a bit top end, would a 2.5" dumped before the rear diff solve the problem and have an even rev range?

was thinking of high flowing the turbo on my 80 series 1HD-T but have heard that the standard turbo provides enough air to the engine. that may be at stock but i would like to run 13psi with an intercooler and when i get it on the dyno i don't want to be disappointed. also is it true that high ...

gday fellas any ideas on intercooling a 1HD-T was thinking of both options as in air-air and water-air intercoolers, if you guys have any pics of the coolers you've got that would be greatly appreciated. also i know that water-air is better low down but how much difference is there between the two ...

thinkin bout gettin a couple of lockrights in my 80, does anyone have these fitted and can tell me if they're any good. I might only use one so if anyone has only one in their rig let me know if its in the front or rear and how its affected onroad and offroad performance, cheers...

cheers for that mate, do you know if theres a maximum length you can go on the diffs as i have an 80 series wagon and would probably run the rear diff breather into the engine bay aswell?

any ideas on extended diff breathers for an 80 on the cheap??

cheers mate what do you reckon their worth and where can i source them?

i don't know whats wrong with your exhaust but i just wanted mine to sound better so i cut out the mufflers which was alot cheaper than a new exhaust and sounds good too, it would probably be better bigger but it sounds good now, mines turbo...

how do wheelspacers work e.g what size are they usually, do you have to extend your wheel lugs and where do you source these parts, what cost would this be altogether (ballpark)?, cheers...

was playin silly buggers in my 80 the other till all of a sudden it went bang!!!. not to sure what i've done but whether i'm in high or low range the forward propellor shaft spins freely and the rear sounds like its jumping on a gear making an awful sound, needless to say there is no drive, but this ...

trying to find a cheap supplier of 2" lift kits around sydney or even someone who can deliver, any help appreciated...

hey fellas after some help regarding the 1HD-T it seems to be hesitating alot/loosing top end power, at first i thought it was bad fuel(bio-diesel) so i topped her up with about 40 litres of dyno diesel but was still having the same problem. I then thought it may be timing so I changed the timing ...

hey guys anyone know much about terrain tamer lift kits??

hey guys just wondering if anyones heard much about terrain tamer lift kits fo an 80 series?