Outer Limits 4x4 Board

hi all, i am trying to find out if there is a toyota transfer that will fit strait up to a 1uz-fe v8 ucf21auto, celsior/ls400
cheers jimmy

I Have the same with my 105??.but 2 weeks ago i got a recall notice to replace the retainer bolts in the front hubs,so now getting full swivel hub kit and new inner and outer bearings to try and fix , I also have got new tyres and a new steering dampner




cheers jimmy

my wife and i had a great day, and even better night up on the hill,cops were good with all action going on ,noode runs and the drinking .

A great time had by all with no bull sh,t . well done

heading down sat morning from gilgandra for the day if anyone needs a lift ?????, comming back late that night.

i have a 2" lift king springs in my 45 and they are a hard ride , with bugger all flex , now going to coil it.

and thats the best advice onyone can give you , ? find out for yourself what you like, .

you got your loom through marks ,??? yes

thanks mate for the info, thats not a bad idea i might try that . I lived in kingston for 5 years went to school there, loved it down there, then moved to launceston, trevallyn, lots of great tracks up round the hilands and down the east coast. did you have any problems with the loom????. i think ...

cheers ,cranky i just got through reading your build up thread, the only reason i was going to change the transfer was i heard the 80 box was stronger.???? i have done a few other swaps on my trucks like a efi ford 6 to 75 series 5 speed in a 69,fj45 with 75 series diffs, [still building], commo ...

my truck is a 5 speed and when the motor or gearbox dies i will put a ls1 with auto in.

i would like to know if i should use the transfer box or swap it out for a 80 series , and is the motor swap the same as doing one in a 80 series.

any info ??

hi all , has anyone put a LS1 into a 2000,105 cruiser ???


cheers jimmy

all my lights work just not the speedo ,i tried to pull the dash out but would not come out farenough to see.




cheers, jimmy

please help no speedo in 100 series .

HAPPY NEW YEAR,

i have a 100 series but no speedo ,could it be a fuse and where.

it has had the trailer plug cut off but i have sealed the wires. any help would be great . cheers jimmy

OK, JAMIE KERR is my name ,aka madjimmy. i have a property owner in central nsw GILGANDRA who has offerd his land for use for off road comps. the owner has had endro bikes events on the property and now would like to have 4wd comps there. the property has lots of great 4wd tracks and very steep ...

now
i have the tacko in the v6 is sitting at 3grand at 100ks .

if i put 4.3 diffs in and 32''s what revs should i be doing????

well said mellows40 , it only takes 1.

keep puting up great shots of the 40s,its just a pitty we cant get a kit for the coil conversion that they are doing in the usa.

ray, how is the ford going in your 40 ?????

i an now looking at puting the 45 cab on a 80 series with efi v8.

thats good 2.6 reduction should be better on the hiway with 4.3 ratio diffs dont you think.???????????


cheers jimmy.

nemesis,

how strong is the transfer case ??? .

I don,t need to run reduction gears in this truck just get my to and from the mine and tow the 4.5m boat and car trailer.

trying to put the good stuff in my 45 build.

cheers jimmy.

check your earth wires,starter ,bat, block,

cheers jimmy

I have only just got the runner with a blown motor , then another motor and parts,oil then fly wheel parts for auto to man gearbox than some diff ratios ... all within 3weeks.

only a poor coal miner thats 4wd mad with 2 builds on the go

dont i need a diffrent bell housing slave cyl and then %%%%%% for gearbox

no problem mate, the box in my 3.8 4runner had a lot of metel on the drain plug so time to start looking for a replacement .

good luck on your build and do a lot of reading and ask a lot of questons to save yourself time and money.


cheers jimmy.

WAZ , let me know if you want to sell the G52 box .???

cheers jimmy.

thanks omlet i,ll track tham down.

I hope you get your transplant going ,my mate ronny had a 79 lux 253 with 32" bfg, 4.3 diffs 5 speed for a shooting rig. full rego and it was a rocket with heaps i mean heaps of power just no good on fuel . cheers jimmy.

series 1 vn auto small 6 bolt crank

series 1 vn man large 6 bolt crank

castlemain rod shop makes crank to fly wheel adapter for $330

cheers jimmy

thanks for everyone who had tru advice , i will start by trying 4.3 ratio and see if i can save some fuel+ money.


cheers jimmy

not sure no taco but revs hard great pickup. need to find a pulse wire to get taco to work??? .

a mate of mine has a 253 hilux with 32" ,4.3 diffs still abit heavy on fuel. what would 3.9 4.1 be like??? cheers jimmy