Outer Limits 4x4 Board

will try that , my gq dont stop to save it self... just rebuilt rear calipers,just scored twin piston jobbies for the front. putting new slotted rotors also.. let you kno how i GO..

have a 93 tdi Gq wagon auto 3speed with over drive 35's 4:6 gears get bout 800 ks out of a longranger tank


wat too do>>?????????

not a big fan of beadlocks never had on my last 4wd 8" surf. 35's 15x8 . 10-15psi no probs and it wasnt light put bead locks , sliced to new tyres on simple terrain there was no give in the tyre, therfor streched the tyre, and the smallest rock or stick sliced through like a blade... sold them the ...

ok, im currently running 15x8's , with 35x12.5 mtr wranglers.. never had problem b4.. but last t6ime out i poped d/s front bead off twice. then th p/s off then fucked the rim cause i couldnt stop .running 15psi same as always..


still dont kno

dont kno wat wheel size to go... any help.. good and the bad>>

than x for the suggestions...let you kno how i go..

have 93 td42 lwb patrol, with all the gear, want to update the brakes.?? any suggestions?

i have a 93 gq auto td42 aftermarket turbo. shifts ok, some times delays on shift, but it does have 350ks under its belt. looking at reco it soon.

1.

Western Clutch Service is a Sydney business located at Unit 9, 130 Forrester Rd St Marys NSW 2760 specialising in Brake &/Or Clutch Services.

dont like the kaymar jobs, on steep angles you may hit the jack, ive heard of someone ripping off there whole spare wheel, and bracket.... wat 4B do you have...?

picked one up 4 $800..., put it in.. sits under half. used to always sit half way... put the right foot to the floor and held the revs 3500 for a while , still sat under half.. good... exhaust temp gets around 500ish when giving up hills or a hard time.. it is a auto 4.2tdi.... am happy so far

have a gq patrol, 35's turbo kit... warms up a little , as they do.... just wondering if anyone has put one in, and wat the results were???

you dont say.... i asked if there were any near southern highlands... didnt ask if any in picton..... i kno where the all are... worked for ARB corp for 8 years.... just wanting to see where people.. say.....like a poll.......

general accessories for your 4wd, bits n pieces.......

need a place that dose good work near southern highlands... also camping Gear>>> any suggestions>???

hi, have gq lwb , 6" hd coils , have 40mil packers in rear , and bum still down>>> have the normal mods.. kaymar rear bar, 1xjerry can, 1x wheel carrier, roller draws, and water tank>>>> arb bar 9000k winch>?? sidesteps and rails>>> front sits ok, but rear is down>>> least 30-40mm has any one have a ...

does the solinoid have 2x big terminals , and 2x small terminals>??
wich have you powered, and wich have you earthed???

not a chance>> totally different mounting/chassis

Have already. top arms and bottom , but when it travels it push's the tyres into the rear bumper /quarter panel.. thinking of relocateing the the bottom mounts forward ,and off setting the ends of the top arms to clear the tank. i have seen both 4 link setup, and the one i just metioned done by ori ...

Just done a SAS on my runna, leaf sprung.coils rear.. my prob is , i dont kno wat to to with the rear setup>>Arms are too short, was thinking of a 4link setup rear.. but have to chop the main tank, and get a custom.. would like to keep tank if possible.. but want more travel in the rear. its has 5 ...