Outer Limits 4x4 Board

Can anyone clear up for me . Are. The 2006 4x4 hilux body shells different
To the 4x2 shell. Have a damaged 4x4 shell needs replacing is it
Possible to swap with 2wd one .as have found one cheap

thanks wally do the early cruiser diff solid spacers fit the later model diffs close enough to shim them as this is what i was planning to do 'but not sure if can get the solid spacer to suit like you can for the early cruise diffs..

where /how is the best place to buy a solid pinion spacer for 80 rear diff.and shims....... im in fraser coast area but doesnt matter where from.. or does anyone know the dimensions of one so i could get one made ....

thanks a heap mate yes thats the easyest way and now the way i will do it

thanks but it alreadry has 2 10mm spacers and still wont fit ..think the only way around it is do with out the spacers and just fit straight to bar cut out spotlight mount bar alltogether..

will hi mount fit in 80 arb delux winch bar or only a arb commercial winch bar i have a delux winch bar and a hi mount its not looking like its possible [without modification] i had a low mount fitted in it with adaptor kit.but now when i trying to o fit this hi mount but the gear casing hits on the ...

my extra cab is also 5"fronts and 4 in the rear for its stance and same drama its a little harsh in the rear end on the bumps

would think it maybe .. drain the oil have a look for metal particals in the oil...should be quick indication

ok will do thanks

yeah but i think limpy is scared that someone will drive it properlly.... thanks for bringing trev out for a drive ... keep us informed as for when you guys are going out for a wheel next or going away as im keen as to tag along

was a good session here is a couple of pics from the day. http://i208.photobucket.com/albums/bb187/muddymad/P7140322.jpg http://i208.photobucket.com/albums/bb187/muddymad/P7140316.jpg http://i208.photobucket.com/albums/bb187/muddymad/P7140325.jpg http://i208.photobucket.com/albums/bb187/muddymad ...

ok dude ill be there most of the morning as i hope to get away maybe at 11 to shoot up to benaraby for the drags but not to worried if i dont get there as means i can get to croozer park earlier to catch the end of winch challenge .. what time you think you'll be through .. are you local

mate we were trying to find one ,but had no luck,do you know of any around,,,,

Just a quick note to all that Brett at Fraser Coast Steering and Suspension Hervey Bay has asked if we could let everyone know that he is holding his official opening day at his shop at 8 boat harbour drive on sat morn and is having some promo stuff and Mickey thompson are sending some of there guys ...

yeah i know but insurance company thought it was enoungh to write it off..

can also get perspex cut as it is not beside ocupents (aparently)....that is what i was going to say if asked but no body asked any questions

yeah mate as far as im aware.. seems to fit in mine alright

yeah i dont like the straight up and down back wall looks cheap so i wanted to keep the factory look of the 80 ... was done by good mate of mine .. tray took a bit of stuffing around to get it to look right with the cab... just made up panel below window ..goes much better with less weight a little ...

this is why i chopped it up...



was not much damage but good enough excuse

sorry to hear bout ya roll over ... any upohlsterer will be able to do this piece of piss... i just had new one made [vinyl] cost 250

Hey nice chop "69 mud", Good to see there are more and more people willing to chop up perfectly good wagons. Nice bar work on the tray too :D thanks chpd ...its good to get this project to a end .. hanging out to get out and use it .. still needs fair bit of finishing off but i getting there

my 80 extra cab not finished yet bet getting closer

here is a link to my 80 extra cab project ....hopefully with rego next week




http://www.4wdmonthly.com.au/shed/index.php?id=298

just wondering if the guys with single or extra cab utes have done a chassis extension or how they moved the rear axle back from the rear of the cab as it is close and will hinder running decent tyres