Outer Limits 4x4 Board

Thanks for that MUD000 will let you know if we want to go ahead with that later we are just doing our research and looking at different ideas thanks heaps for your info

what do you mean when the kit comes with the box and what intercooler do you reckon

Hows any one got a computer upgrade chip in their ute is good worth it and what benefits do you get are they worth it for the money. please let me know and can you fit it yourself.

thanks fellas wanted to know if it was a direct swap sounds to hard for now but it is a lock rite locker, does that mean it could fit.

Just wondering if the front and rear diff's a interchangeable in a 92 softy 1.3 i have a locker in the rear and i was wondering if i could put it up front.

Havent got around to doing the jack shaft yet but i will this weekend and ill let you know how i go

Peolpe have spoke about aligning the shalfs up by the dots on the end of the slip yoke male and the female end ive found the dot on the male end but not the female can you tell where it should be or take a photo of one so i can see where it is, because apparently i have phased them up wrong. cheers ...

yeah got ya now yes they are aligned. i repaired the t case brackets is this what you mean i hope i got it back to where its meant to be it must be because as i said it doesnt vibrate when the car is low. is the jackshalf the one from gear box to t - case. could it be wheel bearings

Yes t case lever is going nuts. i replaced both uni's with brand newys and greased them all its still doing it got me stuffed. what do you mean by phasing?????

Not sure about the clutch have to check that out havent taken much notice there but i will. the diff angles were tilted up. might get two new unies for the rear as the front tail shalf is brand new and longer so i didnt have to put spacers in. Now you have said that sring wrap can make a shuddering ...

Thanks for your replies the vibration is coming from the drive line under load eg when you take off from a standing start. it is very anoying i was told it could be axle wrap i forgot to mention that the car is sprung over ive check the transfer mounts and one was twisted so i straigtened it a ...

I have noticed people talking about (RUF) please fill me in on what this is.
Plus i have 92 sierra 1.3 s4 rockhopper gears standard shocks and springs and im getting a bad vibration in 2nd at about 20kms hr and slightly in 3rd can anyone give me some ideas of what tihs could be.