Outer Limits 4x4 Board

Have you tried driving it or just free reving it?

Painting's all about preparation, spend the time to prep the surface to be painted and the results will be much better, if you choose to respray down the track will be much easier to rub back and respray.

Of course using enamel on enamel or acrylic on acrylic etc is a good start!

http://www.motorco.com.au/upimages/hzj7 ... atalog.pdf

I would expect to see lots of messy crap in there water and oil if he's done any water crossing etc, i'd be inclined to do wheel bearings and even pull centre's if it's really messy.

Here's a thread from a US site, i know their rear axle setup is different they have semi floating axle's we have full floaters so not sure if everything else is the same? There's plenty of other thread's about front disk upgrade's too. http://forum.ih8mud.com/60-series-wagons/173412-rear-disc ...

I'd say rust would be the biggest thing to look out for on the FRP top model. Windscreen surround area, firewall etc maybe they have all been replaced with fibreglass surrounds by now? $8000 seems steep for an 89 it would have to be good to have a second look at! The 5 speeds are good but seem to ...

Anything happen with this mate...pics?

Quality pics thanks for sharing!

Everything seems to be working ok for me. Maybe it was resting at 2:07am?

Maybe there's a hole in one of your locker lines?

Can you disconnect the lines from the compressor and run it see if it still does it.

A piece of lightweight leather or denim works well in covering the wire spool in this kind of system also helps to clean light surface rust from wire, just need to attach it somehow.

I was actually referring to the quoted pic, girly boys.

If i was a mod i would delete it in the name of bad taste!

http://www.firesport.com/cars/maz929/brokendown1.jpg http://i55.photobucket.com/albums/g156/planetfear/Fingers_and_thumb_in_circle_downwar.jpg Why are you posting this dribble on here???????????? WTF? Go to www.mazdabator.com Your wasting your time and mine. Yeah i know i don't have to look at it ...

You can get longer nipples 45 or 90 degree one's etc.

I had the same problem with my 2h, turned out to be a loose connection on oil pressure sender giving a false no oil pressure signal and shutting down for a split second...

http://www.haymanreese.com.au/consumer/ ... ts/vic.asp

Hope this is of some use.

Any place that fits towbars should be able to supply you with it.

Thats why i've posted a link, mine's JUST a 2H.

Here's another couple that maybe of some help now or in the future.

http://perso.orange.fr/adherence_4x4/moteur2H_12HT.htm

http://forum.ih8mud.com/showthread.php?t=104179

Sure a lot of this stuff is 24v but hope it helps?

GT

Try a search here...

http://forum.ih8mud.com/forumdisplay.php?f=24

Prepsol/Wax and Grease remover and a plastic bog applicator, repolish after.

A Kiwi version...

ok have a look at the length of the cable, the outer part is plastic if it breaks at some point the gap that is left from the broken bit pulls together making the cable shorter...

Is the outer part of the cable ok? They get brittle and the outer casing falls apart...

I see the last 7 or so posts as school kids bickering, it's off topic banter.

Sure im guilty of it too from time to time...here in fact!

pm the guy if you have a problem with his posts grimbo.

Ok i'm no expert but i would say it would take a lot to invert front shackles? Mine are vertical in the front maybe a couple of degrees more to the front, if they did invert then i would make some anti inverts or modify mine. Have'nt checked out the legal side of making your own or modifying but ...

Have you seen anti inversion shackles?

Mine have inverted once in some really rough stuff, after i greased them.

Ok looks like you changed the first post to include the bit about different shocks. Should shocks be suspension limiters? I don't think so... Eliminate your suspension woes and buy a cruiser. :armsup: what else would limit down travel apart from shockies, or limiting straps which afaik no OEM ...

Ok looks like you changed the first post to include the bit about different shocks.

Should shocks be suspension limiters? I don't think so...

Eliminate your suspension woes and buy a cruiser.

just want the flex to be better next time i go out with you and jas n them. How will extending your brake lines give you more flex? Are they restricting articulation? Google man! http://pn2.whereis.com.au/gns/map0PCF0KWNTM6ZJVBM6.gif Enzed 352 Nudgee Rd Hendra 4011 (07) 3268 2132 http://pn4.whereis ...

www.enzed.com.au Will make them for you!

I was quoted $35 a corner.

Hey jas i'm looking at buying one of these they look the goods but had nothing to do with them... The GME TX3220 is a pretty good budget option although the auto squelch can be annoying depends how much you use it i guess. Pretty sure WOW has them around the same prices? http://www.lakecomm.com.au ...