Outer Limits 4x4 Board

Power auto in Greens rd Dandenong make a plate that bolts to your chase
I did it to the bar on my 60 and it worked well

I have the same model with no free spool it can be added by changing the top casing, The internal gears are the same. I rebuilt mine with the 4hp motor, Im told you can fit the 6hp. Ididnt bother with the free spool because there not that good on a high mount anyway and at 74 feet per minute try ...

Yeah Dandy end of Cheltenham rd Next door to Total Tools

Try G & J drive lines in Cheltenham-Dandy rd

sell the chescold and by an engel

The only duel case for the h55 is the Marks cruizer crawler
At about $3500
Marlin don't make a toybox for the h55

Dane wrote:Calbah do a bolt on coil conversion for 40 and 75 series, but it is not cheap.

Also fits 60s

60 series came out with 2 diferrent types of rear spring packs one with overload leaf one with out use the one without and you will find this pack to be about right you will definatelly with out question need to fit a track bar The axle wrap on my spo 60 will destroy a spring pack in one day trip to ...

Beg to differ Marlins toybox is available for the split case
but not the h55 five speed, only the 4 speed h41/42
Marlin has no plans to make the h55 toybox as the yank's
didn't get the 5 speed (very little demand)Pity

Snake have been going to release the cruser kit in the next three weeks
for the past 18 months !!!!!!!!
Don't hold your breath waiting

Eurekea
Kaos engineering (or whatever they are called now)
and numerus others have kits available
and can supply hand brake solutions as well
ring around

Use a Commodore fan

I put a Double cardan front shaft out of a early 60 diesel in which
gave it enough clearance without cutting the cross member

The ERPS draws about .02 milly amps or something, Ive left my 60 standing for 6 weeks without the battery loosing any charge they do run 24/7 and yes they do work I live 200 metres from the sea and rust in my cars is a big probblem any scratches or unpainted areas of metal you can see the surface ...

I have an ERPS on my 60, It works but won't stop existing rust
But it shore has slowed it down.

I like this style and it sounds like what you wanted
http://realcruiser.com/60sliders/index.html

why not just carry a spare belt that fits

I had a Ford 6 in my 60 till I put in the deisel 80 K's extra per tank and more power than the original 3F which cracked in half. I ran the XE motor but would go for the injected one if you wont to climb hills with out gas I still have the complete Rod shop conversion kit Yours for $500 if ...

Eureka make 3'' roll bars Frankston Dandy Rd Dandenong

Kitchen rd Dandenong, Complete shopfitters, They make and refit
checkouts for Coles and Bilo ect they usualy have some old belts
from the old ones, worth a try !!!

Don Kyatt is in Nth Melbourne and Moorabbin

Im a carpenter by trade but I still did my SOA wasn't
that hard, Theres 60,000 sets of instructions on the
net (Mostly Heeps)and if you cant weld good find a mate who can

60 and 75 series diffs will all fit as well as 80 series rear
and they all had a lim slip option just make shore that you have
the right axel splin count ,flanges are easely changed

So post up the phone # see whose got the fastest dialer

Calbah ind make a rear d/c shaft for the Shorty GQ
I'd ring them and find out what d/c they use.
Or have a look at On all 4;s web site they have some
trick looking d/c shafts, he uses one on his hydralic sprung
swb 40

For the best results use the commodore themo very ezy to fit and
you allready know it pulls enough air to cool the V6
Worked foltlessly in my cruiser even in sand with air con on
Craig davies couldn't hack it.

we should go wheeling sometime 60serius yeh I'll pm ya when were going on our next trip. Dont know were or when yet but will be soon, I'm hanging to get up the bush. Got to redo my trac bar first cause it ripped off last trip.(Need a bigger welder and some skill) Got to do the family thing at ...

Don't go any higher if you still want to take it bush
unless you make it wider.You'll see what I mean when you
go wheeling, Take it slow till you get used to it.

[quote="bundytunna"]ive got 620mm clerance under me sills now
not too bad i reckon


Yeh not bad now your 30mm taller than my SOA conversion
Hows ya COG going now??????????

I have a Disc Transfer brake on my 60 the same as shorty 40 Mine has a cable actuated trailer caliper on it. The disc is flat no offset and mounts behind the drive flange with the studs through it holding it on Eureka off road make and sell this kit. works ok but really need more leverage than can ...

greenhilux wrote:you dont say what vehicle they are for. therefore ill have a 6'' for my ifs lux

Did you read the thread heading