Outer Limits 4x4 Board

ive got a set of lukey extractors and they fit nicely, but they could ve modded as i didnt build the car

yeah i didnt earth that diagnostic tester. how do you do that what plug is it and what tools do you need

please explain

thanks mate

hey just want to know the timing for a g16b efi motor, because on idle mine ran between 10-15btdc ? without moving the distributor

i woud say so i can fit a thumpstar in the back diagonally

well looks like a long painful process. thenks

so the tail shart does definetly slide back into the box.

hi i have a 90 model sieera im in the process of putting a new clutch in im trying to pull the tail shaft out ie(the one behing the gearbox) and it wont come out. ive tried pushing the tail shart back into the gearbox but it wont seam to budge. what im asking is what is the best way to remove the ...

if you want an aftermarket filter to fit inside the stock air box. suzi sport make uni filters that go in there they are around the $60-$80 mark.

happens to mine as well espicially from dusty conditions. i usually pull my carbie apart and clean out the idle jet wiht fuel some welding tip cleaners and an air gun.

not sure whether its the right thing to do but it works

bit off topic some one told me before i select 4x4 i should lock my hubs i 2wd and drive a bit to warm up the grease it the hubs. is this right

i have a stock exhaust on my zook and have cracked a weld where all my pipes meet together. just thought that was odd

i have spent $1100 on my zuuk. i cut it to a bikini top put a 2inch exhaust from cat back put bigger wheels on 215 75 15 all terrains with sunrasiers and it looks a little modded.

i have a stock 1300 carby fed zook and my idle jets keep getting blocked what could be causing that. has i happened to otheres, is i common cuz the carby shop told me he gets a zook a week with the same problem

hey thanks for that might by a set or make some good design though

advice taken. is it a hard modification... ive done a lot to cars and stuff before pretty mechanical sorta person

im thinking of doing a spring over conversion for my daily driver zuuk. is that illeggal in qld. i tried the seach button..

thanks Reece