Outer Limits 4x4 Board

Thanks guys i may just get a mechanic to do it. I may crack the poos with it if i stuff up.

Thanks for the help

Hey guys and girls, I have fitted the ironman lift to our xl-7 and put some 225/70/16 maxxis on. Still looking for a little extra height in the back mainly. Coil spacers a good idea? if so are the easy to fit and does anyone have a good list of basic steps to tae to do so? Thanks, P.S if anyone ...

no mate but we are going to fraser soon

Hey guys does anyone have an opinion on replacing the coils with taller ones (35mm higher) and not replacing the shocks? We need some more height for the sand. Would this be ok?

had the same issue with a terrano 2. Was the battery. Could also be the relay to the glow plugs. If it is worn then not enough power gets to the plugs and wont heat the diesel enough. Just an idea may be wrong..

I didnt realise we were all so sensative. I did a search and was bombarded with argumentative posts from guys about using the search feature. I have been a member for long enough to know to use the search . I was hoping for a short few comments from you knowledgleable blokes to steer me the right ...

Hey guys - you are always helpful on this site so Ihope you can be again - I am going to buy a GQ Patrol very soon and I am unsure which way to go - does anyone have any opinions on Gas vs diesel? And 2.8turbo vs 4.2 diesel aspirated? And the 3.0lt engine - I just don't know which way to go - we ...

Hey guys. I need to know if the rimmd from a 1993 D21 terrano will fit my Terrano II . It has standard rims now and I want to transplant my existing tyres. Can anyone help?
my rims say 7JX15h2 ET25 DOT 2151040 and the new rims say
J15+6jj Dot topy 128 93n 3.8 4030088015

Thanks

thanks guys I yhink i'll give it a miss

Looking at getting a toughdog RTC steeting dampner. Are these any good at improving the ride on road? Any one got one and have a personal opinion??

this really show my lack of knowledge but is the uni inside the dif housing or is it the flexible joint in the driveshaft?

does anyone know if the 97 terrano2 2.7 diesel turbo has a timing belt or chain or gears? Thanks,


Dave

i'll give it a go and let u know. Just to confirm the load spring is the very bottom one yes? Does this have any other ramifications? IE: poor handling on road or saferty concerns. ( kids in car most of time)

When I take off in reverse or first I get a cluck as the driveline engages. It is comming from where the rear sharf meets the diff. Is this a sign of wear or a normal thing for most zooks? Seems to dissapear if I fan the clutch a bit to reduce the impact if take off but if i just reverse without ...

my zook (85 swb) is hard as a rock. should I try taking out the bottom leaf on each set? How hard is it to do.

Sorry for butting in by the way.

I have checked the shocks and the fronts are gabriel red ryder part 738079 and rear are gabriel ULTRA part no: 735516. I cant find these part numbers anywhere in an online cattledog and the gabriel USA website says the zook shocks start with a 63 part no:. Do U think this is the issue? They are ...

also what tyre pressure is good for every day road use.? I have toyo open country AT on it I think they are 28"

I have not checked the tire presuure. How dumb am I. That will be the first check. When I push down with all my weight on the bullbar the car only depresses about 5-6 cm and bounces back realy fast and hard. Is this abnormal. My old suzi was heaps softer and nicer to drive. I have no need to carry ...

Sorry for the 21 questions but my new 85 swb nt has been for its first mini road trip on some sealed stuff and I have never seen a car bounce so stiff and hard. ( even a suzi) My whole body hurts, It has newish gabriel and munroe shocks but really old spring leafs. They are flat with no curv at all ...

Hey guys. I have just got another 85' suzi swb and the rubber bushes inside the spring leafs are stuffed. How hard are these to replace and were should I get them. I have seen some kits on ebay for cheap. R these ok for everyday road use?

thanks mate I will give it a go and see how she performs. I just didnt want to damage a good motor. The guy I got it from says he has been using an additive forever so hopefully I wont wreck it.

I have just bought an 85model swb 1.3lt suzi, Can I use straight unleaded or should I put in an additive to replace the lead.??

I;m in port macquarie nsw 2444. not sure if I need one yet but will no when it gets checked next week.

does anyone know how much a 1.3lt transfer case is worth second hand? Or better yet does anyone have a spare to get rid of?

any on e know how te 4.5 lt petrol engine in a 97 cruiser goes for econmy on lpg?

Just got the belt done at a local maechanic. Not to bad around $300 for that component of the service, Got the rst of it done while i was there so shes all ready for sale now.

My Father in Law has an immaculate 88 GQ with 170K on the clock. Does a bit of towing and is thinking abouta second hand turbo kit. Is this a bad Idea? New kits are not really an option for him due to price vs age of vehicle. Does anyone know of this being done recently and/or have a used kit they ...

Hey guys. My forntera has just hit the 160k mark so U know what time it is. Has any one replaced a timing belt in this car them selves and what is involved. I am no mechanic but I go alright. Can it be done without a full workshop or skould I bite the bullet and go to a mechanic.???

Will the clutch and pressure plate from the 1HZ 105 series fit the 1994 1HZ DX seris cruzer?

Any help is much appreciated.

Hey guys. I'm new to the nissan world and am looking for a 1988 - 1992 patrol diesel wagon. Just wanted to know if there are any major known issues with these cars and if there is anything major to watch out for. I imagine I will be looking att one with high kms as we don't have lots to spend. Does ...