Outer Limits 4x4 Board

thanks, I tried that before but it was playing up and wouldn't let me veiw the page. I'll give them a ring and see if anyone there knows anything about it.
cheers
Brendo

I have managed to find out that the body was made by Superior Engineering in 7/1982 (the vehicle was made 3/82).
Has anyone heard of them? I've googled them but didn't come up with much. Just a few dead links.

Hints?

The body is all steel. Its a ute cab that has been extended. The rear corners have been moved back but the rear wall still sits behind the drivers seat. The cab behind the seats is a plain bit of folded steel, or come to think of it, it could be ally (I'll go check). The rear doors are factory 40 ...

G'day. I just bought a dual cab ute 40. I fell in love with em a few years back and have seen a few around, so when a local bloke had one up for sale with a 1hz, garrett turbo and a 78 series running gear (including coil front end) I couldn't knock it back. Now I want a bit of background info. I was ...

Had a bit of a whoops guys
My mate cooked an '85 and is pulling the motor out of an '88.
Sorry bout that
are we in for a headache?

G'day guys Mate cooked a '89 2.4 diesel hilux motor. Bought a rolled one and we're gonna rip the motor out of it to put in his. Any thing we should know before we start. We're not changing anything. We're putting a 2.4 back in it. Are we in for any suprises? Ta. P.S. PM me if you want any parts from ...

I've got a '79 BJ40
I'm hoping someone can tell my what amperage fuses go in each slot in the fuse block. Just want to make sure the right ones are in it.
Thanks
Brendo

My mates Spookey is running 32 muddies and runs way too fast on rocks. He already has rock-hopper t-case in it, but wants to drop the diff ratio coz he can't even use 5th gear on the highway at 110 (it just dies and has to drop back to 4th). Any suggestions. We've toyed with the Hi-lux or Patrol ...

you've got email (I can't put the picture on the pm or post?!?)
Cheers
BrEnDo?!?

G'day If your looking for a bar that is going to 'persuade' and 'detur' pests like Roos and Barinas, then I got a nast big gate bar for ya. If your looking for a simple little one, then i got one of those too. I got one thats inbetween too, but that reqires a little bending and welding, but still an ...

G'day Thanks heaps for all you info etc. Just a few questions PlanB. Is this bloke just down from you on Outerlimits? He seems like the bloke to talk to if he's done one already Fieldsy. Who is this smoking man that you speak of? Aza. Where does your mate live? If he's close to my I'd be keen to go ...

That sounds pretty expensive. As much as owning a stocker like that would be, they seem pretty rare, and that mean hard to find and expensive. I have seen two of the modified numbers before and looking at it quickly, I found the body mounts should be pretty close. If any one knows anything about ...

G'day. I'm getting keen to build a dual cab forty series ute. This would involve pulling a ute or troopy of a long wheel base chassis and swaping it with a shorty body, then ading a small try to the remaining rails. I've only seen it done twice before and was wondering if anyone had done it or knows ...

G'day. Looking at buying a 40 but it's got a (filthy) petrol (4.2l 6cyl 2f) motor in it, and I wanna change it for either a *3.0l 4cly B *3.4l 4cyl 3b *4.0l 6cyl 2H ...diesel motor. Has anyone one done these comversions before? Any problems? Any suggestions as to which one (or a different motor). I ...

G'day Is there a chance that it is a toyota Stout or something like that. They look pretty similar to the forty from a distance, but are a bit smaller, kinda like a zook. I'm pretty sure they came as utes. The only other thing I can think of is a Forty ute body mounted onto a shorty chassis (a very ...

G'day. Am interested in pulling a 2f donk out of a shorty forty and putting in a B (3l 4cyl) diesel in its place. I was wondering if the exahust mounts the same to the manifold or if I had to replace the exahust as well. Also, does the four speed box from the petrol motors bolt on to the diesel donk ...

A mate of mine had one for 2 years and sold it to buy a spankers Mazda Bravo. No he wants i back coz he misses it. they are a great thin, cost nothing to run, and are good for around 300,000kms. They can tend todo CVs if you relly give them a flooging in reverse (extended bouts of front-wheel-drive ...

G'Day My old man is wrecking a 60 series cruiser. There are a few of lifes little luxuries under his car that I would like to put in mine. I was wondering if: A 4-speed box (came out of a 1983 hj60 with 2h donk) would fit into a 1980 bj40 with a b (3 litre) motor. My box is a 4-speed and I'm pretty ...

I've got some bench seats from a forty here (rears). I can send you a photo if your interested. I'm not sure if they are what your looking for.
Cheers
BrEnDo?!?

G'day.

Please pardon my ingnorance but what is the difference between a BJ40 and a BJ42.

Cheers
BrEnDo?!?

G'day.

Please pardon my ingnorance but what is the difference between a BJ40 and a BJ42.

Cheers
BrEnDo?!?

G'day.
Don't understand what you mean by lift the steering column up. Lift the bit in the fire wall or where?

Also, If you lift the box, does that mean that the castor angles would be out of whack (i'm getting plates made up anyway, I'll just change the angle)

Cheers
BrEnDo?!?

G'day. got a few troubles with my BJ. 1. Transfer case won't go from hi-4 back to hi-2. 2. Edic motor isn't activating when I hit the key. Can't find any blown fuses. 3. Wheels are scrubing in the the guards. How many blocks/bolts do I need for body lift, how do I fix steering, do I need caster ...

Hey fellas. I'm sick to death of my 33" BFG AT's scrubbing in the guards of my BJ (long live the 3ltr). I'm keen to a 2-3 inch bodylift in. Firstly, a question for BJ on Roids. Is it possable to run a 60 series steering box without all the power-steering non-sense that goes with it. If yes, would ...

Hey fellas. I'm sick to death of my 33" BFG AT's scrubbing in the guards of my BJ (long live the 3ltr). I'm keen to a 2-3 inch bodylift in. Firstly, a question for BJ on Roids. Is it possable to run a 60 series steering box without all the power-steering non-sense that goes with it. If yes, would ...

I've got a 1980 BJ with 33/12.5/15's. They do scrub, but only when the going gets fairly rough, and only very slightly. I've got ARB A14 springs under mine, but they have been modifyed (shh) and the guards are bent down slightly, so it's probably about the same height difference. I would suggest a ...