Outer Limits 4x4 Board

Hey all, i have a 4.5 petrol turbo 80 series. has manual at the moment but am changing to Auto, does anyone know what the best Auto box to use is? Due to can not get an adaptor kit for a 4L60E. Cheers

yes still running standed axles but they are not the prob. i have been told not to drill out to 10mm besause you dont end up with bugger all steel left on out side of hub


MUD80D

any chance of a bit more detail.

I own a 80 series 4.5 petrol landcruiser. I have recently put a turbo on it and am pushing 250 RWKW. Since i have done this i am constantly shearing bolts off the rear hub. Have had changed to unbrako's and also removed both dowell pins and replaced with unbrako bolts also. Can anyone please give ...

just wondering what a second hand set of radius arms with 5 inch castor plates would be worth, bushes still in good condition. cheers

does anyone know some one with a second hand pair of snake racing raduis arms or simalar for 80 series 93mod to suit 5 inch lift. cheers

i got my longfields from
BOBBY LONG
20719 111TH AVE E
GRAHAM WA 98338
253-847-8254
they cost me about $1150 for cv's and axles delived to my door. down here the chepest i could find them was $1680
i have a 4.5 turbo petrol, 225 RW KW and have not smashed one yet. i have also done stud upgrade

would like to see dyno sheet of that

is vl or vn air box going to supply enough air though

Hey there, on weekend tryed to use winch went out no probs at all but would not go back in. Tryed to get mate to winch and same thing happend same place. Now they will not go in or out. Solenoids are still clicking

Hey my mate has a GQ 355 stroker gas/petrol, wanting to do custom air box and snorkel. there seems to be bugger all room under there to put air box have tryed gu one but to big, and 2nd battery seems to be in the way. any one have any idears. any help would be graet

HEY THERE I NEED A 4.2 TD. NEW OR JUICED UP TO GO INTO A GQ ANY ONE KNOW OF SOMEONE WITH ONE. IM IN WARRAGUL VICTORIA.
CHEERS

Hey all. Wondering if someone can help. It drives well cold temp, when warms up it wont rev above 3000rpm. I fitted 4 inch stainless snorkel. Would this effect if not dyno tuned before i drove or should computer adjust to this fuel/air mixture.

yep it was the timing CHAIN boys. did not f#*k any thing else. sweet as. back in action 2moz. mmm 240RW KW cheers for all replys

Hey i have a 4.5l 80 series turbo running 13psi, out for drive last night and it just stoped. have power to fuel pump but no spark. the rotar buttun is not spining. i was thinking cam shaft is f@#ked.any other thoughts on this would be great. Also if it is the cam, what would be the best upgrade for ...

not sure bud just started thinking about it last night. so just wanted any info i could get. What turbo,computer r u using are you changing anything else

looking at monsta t3/t4 turbos on ebay just wondering if anyone knows anything about these turbos? any good or not? not chasing max power just want a bit more grunt. any help would be fantastic

hey, has anyone put turbo on 4.5l 80series. if so what had to be changed(computer, fuel pump?) how much psi running? what rear wheel KW. half way into mine at moment!!!!!

My power steering pump on the 80 is f*@ked. It is wyning constintly and the poor thing has to turn 36s. Has any one upgraded there power steering pump before, if so to what?? Any help would be great. Cheers

cheers guys, think i will try toyota bushes cause these are my second tough dog ones in under 1500 km. cheers again

Hey guys i have a 80 series has 5 inch lift 36x12.5x16, have done ajustable panards, caster plates, every thing is new, but have not done return to center sterring dampener. And i get the fucking death wobbles, not good. its not the normal little bit of a shake it goes off its head. Can anyone help ...

just bout to fit 36x12.5x16 to my 80, it has 5 inch efs lift has anyone had to cut gards or make any massive changes to fit them under so they dont fuck shit when flexed up????????