Outer Limits 4x4 Board

hey guys got some stuff on the way to start but was wondering if any1 else does engine mounts and the motor to gearbox adaptors i have seen marks and just seem like to much of a kit that i dont need , and not sure if they sell seperate parts or not just wondering if there a a few other people that ...

ooo seeing all this flex just got me wet :P imma pretty happy with my flex would love heaps more in the front but yeah this is what i got sooo far


http://i3.photobucket.com/albums/y86/orsome4some/4-2.jpg
http://i3.photobucket.com/albums/y86/orsome4some/4-1.jpg

and a bit of flex form me mates ...

ah true yes its a carby 4.2 thanx yeah i was just wondering thats all good to know imma not the only one spendin all my money on fuel each week

hmmm what fuel acon u get get ... i had a 308 and if i was floggin it it would be about 15L/100km and highway 10L/100 so imma not sure but wouldnt think it would be as higher the v8 also it was a stato so about the same weight

hey guys just was about to change plaugs today and went to grab the last lead and it was broken and just wondering if this is y i was getting bad fuel accon been geting 400 or under km's to the 80 liter tank the thing is its been running fine but yeah another thing is prices for this stuff lead set ...

aha u havnt evan been 4bien b4 ull want a bigger lift as soon as u do

hey guys i just got new panard bushes druring the week because i was getting wobbles and it didnt really help at all and i looked at the bushes today and they are like all stuffed..... um they just shit and should i just go genuine ones?



also in 4wd it was making a cluncking noise outta the ...

hey yeah i replaced mine and the oil was really crap in the master cylinder and its gone into the slave and stuffed it quicker just need to replace both master and slave and fully fluch the lines maybe the prob

ahah aw imma the only one that voted for the claws :P yeah i wouldnt know what ones are betta but i just like the look of the claws


as for macca :P when i didnt have my 6 inch lift i was keeping up with mates with gu 6 inch lift ,gq shorty 5inch and a cruiser so we can drive alright :) lol he ...

ah ok so ill get nice and thick plate to put up to the chassis oo should be a bit of fun makeing em thanx

oo almost forgot umm also wondering what plate metal to conect slider to the chassis would this be the same or how many mm would you guys use

hey guys was jsut goin to make some sliders up for my patrol and a gaurd for the back was just wondering what thickness metal to use was thinkin about 3-5 mm but yeah i dont want it to bend or anything any sujestions plz

The whole chev deal would have cost me less than $7k, not by much though. Depends on individuals ability and contacts.


true its all personal opin i would rather a 304 with a strocker kit rather then a chev just my opin but yeah i think the turbo would still be a bit cheaper and it is pwoerfll ...

Sorry it's of topic Mulisha, but wouldn't you have been better fitting a Chev? Since you haven't skimped on money with your turbo setup, it probably would have been cheaper, a fresh engine and no fuss good power.
to do a engine conversion properly you would be looking at well over 5 grand, where a ...

thanx mate i can check that pretty easy will do today

ah ok thanx heaps was worrien me heap i thought it was the tyres lol

hey i had a slight leak in my tyres and i found little bits of sand in there couldnt see from the out side took the valve out drove a car on it ( just to brake the bead ) then found there was all shit around the bead cleand it and then was all good

MKPatrolGuy wrote:Panhard bushes

that all and what sthat usually cost

hey guys i have a gq patrol and i just got a set of mt claws and when i drive it it gets major wobbles when u back off the gas i have had my 31's and also some wrangeler 35's on and i havnt noticed it but when i put my tyres on a mates car there fine so it must be somethign to do with the front of ...

hmm i though it went hard just my thought but yeah u will always have a few buggs to get out when u do things like this hopfully its not a big one ( need to do tuff laps tomoro night and smoke some comodores )

yeah iv done a few hundred dollers dam already iv bent both sides under the doors and the front left door already doesnt shut to well bit disapointed but what can u do... apart from make a bar and it wont do it any more

hey mate yeah is it useing more fuel when they get dirty they usually dont spray like they should and also does it blow much black smoke ?? another factor or dirty injectors but yeah i recon if u have replaced the fuel pump id replace the injectors so u know there all done together u usally do them ...

ah nice they look simple but good and effective thanx

ah thanx the pic gives me another idea thats what imma trying to look what to do what bar work to do how far to go and that sort of thing

thanx damien

If you want engineering problems try living in Qld where I've seen 2"lift canaried on 31's


have u eva though he had something else wrong with the car ....

home made lift ??? bald tyres ??? i dont see how u can get defected with original tyres and legal lift ....


Thats it mate, at the end of ...

hey guy i was just wondering if some people could link a few pics of there rock slider bars and also what u recon about cutting the back guard or just make a bar under neath it like the pic i got a bar bender and welder so it should be to hard to make up a few bars just would like some ideas on what ...

hey mate yeah deff id be keen on that lift i got a gq with a 6 inch and i like it but i was just looking at a guys gq with 8 inch springs 2 inch body 10 inch shocks and mt 38/15 tyres and i loved it it was sic as and it still drives fine i mean u loose a bit of power / handleing but yeah u got a ...

hey mate umm i got king springs for mne and they were 300 and i got the pro comp shocks for 600 and yeah they been fine for me but yeah i havnt had em long enough to see if the springs sag or not but the shocks are good i have given em a pretty good work out but yeah though id let u in on some prices

um i was talkin to him about tyres and a mate has brought some barja claws and they are meant to be 35 /13.5 /15 but when he has mesured then there 36.5's is this just different measuring syster and will 33 mt's be like 34's or so and comments ???

also he has some mudstar mt's atm and they say 33 ...

HEY thats my patrol with the 6 inch :D

but yeah imma not really stubourn i just and a tight ass that this if i am stupid enough to put a 6 inch suspention lift with 7 inch shocks i need to make sacrifices

also i extended breather hoses unbolted the brake lines ( verry tempory thing) so it didnt ...