Outer Limits 4x4 Board

Not 100% sure but i did here around the 800-1000 for disk to disk
Heaps stronger but u will lose some clearance
I've run mine locked and on simex's and now swampers and never had any dramas...

Yes they fit,yes they are stronger and yes they are the same ratio

I love to hate my fender but dont think i could ever part with it....Yeah the 80series are nice but there a yota and dont have any character..

For 15k you will pick up a very good 300tdi around the 96model at a guess
and probably with a few goodies already on it.....

Just make sure its been looked ...

For brake lines Allied Brake and Clutch in Cranbourne,he will make them on the spot any length you like and were about $40 each when i did my rangie and 110

Allied Brake and Clutch
228 High st Cranbourne
Ph 5996 5655

The new v8 diesel for next years Rangie sounds sweet 200kw @4000rpm and a massive 640nm @ 2000rpm
6sp ZF auto
11litres/100klm combined driving
43 to 1 low range first gear



That combo in the new Defender would be awesome. I bet LRA would sell a lot more Defenders too.

Oh i forgot to add that ...

Hmm would seem they have gone a little backwards in there choice of engine,looking at there power figures they are very similar to the 300tdi

The new v8 diesel for next years Rangie sounds sweet 200kw @4000rpm and a massive 640nm @ 2000rpm
6sp ZF auto
11litres/100klm combined driving
43 to 1 low ...

Just looking through the ARB catologue it appears that up until 94 there was a snorkel for petrols and a different one for the TDI..

After 94 it would seem they are the same,the only difference appears to be one for ABS and one without...

These are Safari Snorkels...

Kev

Ok when i say it leaks like crazy i would describe it as damp after every rain and if its been raining real heavy for long period of time i might get a small pool of water..I have never had wet socks

Nothing to worry about at all

LOL Mine leaks like crazy,after a good rain the drivers side footwell is wet but hey with rubber mats who cares...remember its a hose out interior anyway.....

As for performance:No u cant chip a 300tdi but u can easily mod the fuel pump at home in about 10 minutes and with a nice free flowing ...

I'm very happy with my Pro Comp ES9000 that i have in the rear of my Defender,good value for money
I am also vey happy with my OME i run in the front....

Measure up what u need then shop around to find a shock that comes in the right length for your truck...

I would dare say these Holley Avengers would be quiete exspensive,why not look at a rebuilt Quadrajet....IMO they are a much better carbie than Holley and will work on just about work on any angle...

Just my 2c

I'm not 100% sure but i believe the max size measured is 36.8 or there abouts

Pretty sure they put the tyre through a tyre guage and I think its about 36.5 or 36.8, cant remember :armsup:, Creepys and procomps wont fit hence the mass smoke up of tyres at outback challenge.

Pretty sure the ...

I'm not 100% sure but i believe the max size measured is 36.8 or there abouts

Dont give it away Drew but i guess it depends on how quickly you need to move it.
Would be an absolute bargain for 10k

Hmmm thinks to self


Nope no room for another one....

How many buggies have you guys got signed up or expect to enter.
I'm trying to get some friends to come along and have a look and i want to try and sell them on the idea!!!

Sounds Absolutely awesome Drew,get some pics up i have never seen an xtra cab before....

Way to much...

Seriously my mate bought some Airman Bags and they cost him $1300 just for the rear of his 80series!!!
Then add a compressor if you dont have one and the add about $3-400 for solenoids if you want to control them individually.
Plus you need a pretty stiff set of shocks so add some ...

Thanks for the reply John.
The movent is not causing a vibration thats the uni's fault but i just happened to notice hoo much slop there is in the front output.
I guess i'll add it to my to do list.....

Well i took the rear shaft out and and checked the front uni all is well and then i goto cheack the rear and it is jammed solid one way.
So i guess i found the problem!!!!
Thanks for your input guys....

Interesting christover i recently have done the opposite and increased my lift by 30mm.I am wondering if the uni had got comfortable so to speak and now i have upset it by putting the lift in and it changing angles

I have been chasing a vibration on my 110 and while checking the Uni Joints for movement i noticed the front output shaft has some play in it.

Whats involved in tightening it up?
I will have a read through my workshop manual but any help appreciated..

Has anyone ever had a uni joint that was knackered but to lie under the truck there was no movent.

Basically i have a vibration thats gradually got a little worse and it feels and sounds like a uni but when you lie under the truck and check for movent there is none.

Could it possibly be a that ...

i wonder what the weight is? youd think it must be heavier than a gen 3 because of the OHC. Nice looking motor though, especially without the plastic.

Andrew

I think, (well from the stats I've got here anyway)

Ford Modular V8 DOHC

Width = 28.9 inches (734.1mm)
Length = 27.1 inches (688.3mm ...

Guts wrote:As far as I know they don`t even know who is running it this year.

Plus there might be some huff over where it is to be held.

Ive heard exactly the same.

Looks awesome def90 i love those bars but aint no way i'm paying for one (might try and build one)
Let us know how this weekend goes.

I wont be there i'll be at Ozrock

We need to get some sort of parts list going.Somewhere for eveyone to list all the bits and pieces they have lying around so people can have a look for stuff they need.

If it can be done you would have to use 80series front springs in the back aswell because from memory the 80 series rear spring is larger in diameter,similar to the rear of a Defender.

I reckon its easier to find a set of rover coils and have the right springs with the right spring rates.

Ask ...

Has anyone tried this one before???

It is an actual notcher, not a hole cuuter.

http://www.steeraust.com.au/steer/notcher.htm

http://www.steeraust.com.au/steer/graphics/work2.gif

only 2 probs i see with that, only does up to 2.9mm wall, and can it do angle notches? or only straight?

I ...

Pro Comp X-Terrains come in an 18" but only 33 or 35's