Outer Limits 4x4 Board

Cheers thanks guys

Hi
Are the 2F extractors a match to the 3F? I have a 3F engine in a troopy and want to get some extractors however you see more advertised for the 2F then for the 3F. Is it possible to bolt the 2F extractors onto the 3F engine?
Thanks for any help
Rob

That sounds heaps good thanks. What did you do about the front shaft? I dont think the flange is big enough to re-drill for the lux bolt pattern.

Thats what i thought, but im trying to find somewhere that would make it.

but what about the drum break on the back of the t-case? can i just re-drill that?

Hi
I have a short wheel base sierra with lux diffs. I have two double cardon shafts, one for the rear one for the front. Does anyone know some where thats makes an adapter that will match the double cardon bolt pattern to the sierra bolt patters on the t-case.
Cheers

I'll try and get some pics up as soon as i can. But yes the problem with the uni's is the side ways angle from the transfer. But when i moved the transfer case over an inch or so it got rid of the vibs but now the front drive shaft hits of the cross member. It hits where the cross member bends down ...

Hello I have been here many times already trying to get help with fitting hilux diffs to a narrow track sierra, 1988 to be exact. A lot of people have helped however im still not getting far. If someone has photos or can tell me where i can see one that has been finished, it would be great. My main ...

I have tried almost every angle on my diff since i put the hilux diffs in and there is still a vibration. I have moved the transfer case over about 40mm as well and its not as bad but still there.

Has anyone had to make or buy a double cardan for their sierra. I think ill be needing one for both my front and rear shafts. Does anyone have any tips or advice about doing this?

Does any one know any thing about putting dual transfer leavers in a sierra so you can get 2WD low range?

Thanks guys but i think the problem im faciing the most is the sideways angle. I dont need the wedges as i have just tacked the spring mounts on top of the diff. therefore i can rotate the diff till im happy. Thanks for your help.

Hey out there I have just fitted some 4.8 hilux diffs to my sierra and it drives with a hell of a vibration. The drive shaft angle has a side ways agnle (because the hilux diff center is not offset) and a down angle so im assuming its this. I heard of moving the transfer case but does any one know w...

Because the diffs i have are missing the rear brakes.

Hi
Im after a set of rear brakes. The whole assembly. If any one knows a wrecker or knows where to find a set please let me know. Also does any one have an idea of what price i should be looking at?
Thanks All

Thanks guys for the help so far, however if some one does know of some person who has done it and i can get into contact with them it woulg be great.
Thanks
Rob

Hey
I have a 85 sierra and i have come across a set of hilux diffs which i would like to mount under it. Any one who has done this before or knows anything about it, all help is appreciated. Also what other parts should i start looking for?
Thanks for any help
Rob