Outer Limits 4x4 Board

Looking at getting a cheap fourby again after a bit of an hiatus from the scene. (Coming from Sprung over MQ Patrol and GQ with 38 boggers) To be used for camping/4wding on weekends that can be bashed about and easily worked on. A TJ Wrangler has taken to my eye due to: Massive amount of aftermarket ...

What should a timing belt change be worth from local mechanic?

For a early nineties 2.8 litre Hilux non turbo.

Cheers

Christian

Give it a try.

You will learn heaps.

Just as long as you can have it off the road for a while.

a 5ltr v8 will be cheaper than a petrol tb42 to run also.

i had 37 bias and you wouldnt use them onroad.

look good. rarely got stuck but i had front locker

ebay worked fine for me. i think 40 each of memory from patrolpart

How much are the turbo's?

Yup took a while to find a guy. He cut me up some windows for the back.

To be legal has to be auto glass with the stamp.

Cost 100 for back window and 130 for two of the small side windows

i ran 2 inch body 2 inch spring for my 37's. plus a bit of guard work

Cheers guys, found it as per the first reply.
Was covered in layer of greese

Trying to get a rwc and mechanic cant find the chassis number.

Any one have any ideas where about i could find it on a 1988 GQ SWB Patrol

get some 35x13.5 mudzilla's, Awesome tyre.

I managed to find one for 65 bucks.

Funny how wreckers find those round figures hahah.

Cheers Bartso

Mine stop working i had a play trying to bend the point on to the patch a bit more but now it stop reading all together? Any ideas

Cheers

Try and get one with power steering, might have to go mk. Get a swb piss off the roof and go nuts they are awesome. Just whack some 33 simexs on there and weld the rear diff and maybe front.. My old mq was great fun just watch your fingers with no power steering and also waterproof the dissy and ...

GT30 or GT35

Try get an ex xr6 turbo.

t3t4 works sweet as well spools at 1500 to redline

What manifold are you using?

rims look sweet

Got 37 mtr's on a mates frp cruiser.

I keeps shearing off the pins on the rear hub.

Anyway to fix this?

Cheers

If anyone has a spare lsd center lying around let me know

Cheers

Hello all, Took out my rear diff yesterday to shim up the lsd. Got it out and opened her up and it is open center. It looks like an lsd until its opened up in the center. Question is can i fit an lsd into it, I test fitted an lsd into the core and looks like a really tight fit(close to rubbing ...

Just cut a piece of flat bar and drill holes. I assume to make it longer by 3 inch if you putting in 3 inch lift

They have had swb patrols from mq to gu so a lot of those shorties are efi petrol's 4.5 and 4.8, heaps of grunt.

How do the radius arm bushes go once it full flex? Need to carry a spare set if they split?

That picture is of a custom supra manifold i found on the net just to give an idea. The reason some of the Chinese manifolds crack is they don't have enough bracing. Also a lot of vehicles have exhaust systems that are hung loosely or are not supported enough which will put pressure on the manifold ...

A turbo is mounted on top of manifold on a high mount.

It will look the similar to this.

I'm making some up at the moment, will take a shot once finished

Im doing a high mount version.

The rb series manifolds are a different pattern than tb and td motors.

I can sort anyone out with a stainless steel manifold to fit either tb42 tb45 and td42 with a t3 flange for $500

If you want to fit a smaller turbo i can sort you out with an adapter from t3 to what you need.