Outer Limits 4x4 Board

Hold out hope mate, not every snapped belt will result in bent valves and the like,every one is so happy to paint the grimest picture.
Mine spat the idler pulley and i shat a house brick, but all it ended up costing was the timing belt kit, belts bearings etc.

Good luck

ok im pretty sure ill got the 43% gears, seem to be the best setup for the wheeling that i do. now just gotta save up the $$. cheers for all the help guys. tom. Best thing you can do is go for a spin with someone with the gears already in.Imo you won't be happy with the 43's......if you are doing ...

Rock Hopper do a 83% reduction for the 2.8, avail thru BBM.
They were on sale a while ago for $995.
I have the 83's with 35's and some times ( depending on what you are doing) you will find that even those arn't low enough

[img][img]http://i151.photobucket.com/albums/s132 ... /8OPPR.jpg[/img][/img]

i fitted one to my Patrol, so did a mate, yes they are worth the dollars, but from memory you should be able to get one for around the k mark, i had issues with mine when i first fitted it and Steinbauer air-bagged a new one up over night.........ended up not even being the chip.Cant fault their ...

My money is on the glow plug, try glowing it a couple of times.....this should reduce the amount of time it misses for, if so then 99% sure it will be the plugs

Got my gears about a month ago from bbm, i did end up getting the 85% $995 on sale, i would say the 43%'s would be the same price.
Fitted them myself........prick of a job

Not sure about the seals being the same.....i would think they are ,because the box is the same and the reduction gear sets are the same (shaft diameter etc). I had a Gq T/Case as a spare when i put rock hoppers in my Gu and the only difference i could find with both boxes was the 4wd selector shaft ...

Our little project.Not even close to being finished...... I am in the process of r3epainting the exo black and still have the lux diff swap to do.....but all in all she is getting there. http://i151.photobucket.com/albums/s132/bopsmoo/exo001.jpg [/img] http://i151.photobucket.com/albums/s132/bopsmoo ...

Those last few make my effort look tame..... but i do have a set of lux diffs to go in yet.



[/img]

You start wearing jocks again....just so you don't soil your good jeans

Rip the car in to Motsons @ moorooka. they will supply and fit the mod plate for around the $60 mark. I had mine done and then managed to pick up a pump with 66,000km on it so the modded one has become a back up.

98% sure super shite sell them, well the ones in bris do, about $45 a side for the kit i think.

60L evakool, very happy with it,

mine comes up with the same err code but only when i put a C.D in it.

my mate paid $300 each for 33x12.5
and i got my 35x 12.5 for $310 each, but that was brisdane prices