Outer Limits 4x4 Board

emailed to stinger

I ran into this flexable cruiser on the condamine river road today. he had an outers sticker on his window and the word overkill. Not sure if that's his forum name or what. It was a white 80 series with winch bar, 6" lift, Looked like 33's or bigger. XXXX sticker on the front bar. He was travelling ...

Hi All, was gonna put these NH GLS bits in the for sale section but hopefully get more bites here I have a Cargo barrier (no fitting kit) a LHS Third row seat, a 15" sunraysia rim, front upper bump stops, one hankook 15x30" highway terrain 70% tread, clutch slave cylinder (4D56TD) and a custom rear ...

We just got back from a 4 week trek from Bris to Bundy, across to Alice via Longreach and Boulia and the Plenty Highway Where the old 2.5TDI NH died in the arse! a 900kg trailer and 50 degree heat didn't agree with her, she boiled dry on about 6 occassions from massive overheating. Along with the ...

I was thinking of doing the same with my NH. The DiD thing that is. Was told it was a very big job. Not sure if NL is much different. Hey cookie monster you still wanna wrap your zook? I will be in adelaide 14 Jan for a week. Any good tracks around loxton, berri area?

Burty

For what its worth I've heard bad things about the monocoque chassis when it comes to towing. Bent cars have been reported all over the country. Don't know if you will be towing but thats my 2c. I'd stick with the NL. Not much point having more power in a car that wont sit straight on the road ...

Check this out.

http://cgi.ebay.com.au/MITSUBISHI-PAJER ... dZViewItem

Does anyone know how this works? Is it Legal?

Burty

That's sounds right. That would be because they are a product pedling, Nissan & Toyota Biased mag.

Why would they be locked? The theory is that it helps the impeller to start spinning therefore bringing boost in earlier.

Hi all, I have done a search but can't find anything specific to my needs so here goes. I have heard of a manual in car boost controller that is connected via a "T" piece off the wastegate or something like this. Does anyone have any instructions, photos, links that might help me out. I want to be ...

righto. New air filter made a little difference. Fuel Filter going in tonight. Where do I buy Bio Diesel?

Burty

LSD was standard on Australian GLS models and upwards.

Yeah, I just got back from the workshop that fixed it. They reckon I got dirty fuel. And Embarrassingly I had a slightly blocked air filter element. (Beach Driving)!!! New element hasn't made too much difference tho so I will see what happens with the fuel. I'm only buying BP from now on. Cheers ...

No mate,

I lost 100 per tank. I'm down to 500 from about 600 around town. Crikey 100 per 80 litres jeez I'd have to be an oil Baron!!

Hi All, Quuestion: I have just fit 31x10.5x15 muddies to my NH 2.5TD. After recently spending a lot on the engine to recover lost power I have now lost power and fuel economy. About 100k's per tank!! And the dreaded black smoke is back again!!. Will my new tyres contribute that much too fuel economy ...

takes a whole day by myself. Althought I did this over a 3 day weekend in bits and pieces.

The hi clone goes in before the turbo and after the air filter. I have been told to put two in and some even put six in! Supposed to get the air spinning faster before it gets ti intercooler/turbo. Anyway there is a moneyback guarantee so can't hurt to try? Like to talk to someone who has them ...

A little heat and a litlle care. Glue stays behind in some parts but comes off with turps. I would wrap a complete car for around $2000 depending on design and car. Can even print a design over the whole car eg: Snake skin or any graphic; Naked sheila laying down on the sand down the side of your ...

Wouldn't have a clue as to ratios. Factory standard? does that help?

Thought you all might be interested in seeing this. I am a signwriter by trade and recently decised to give the family paj a facelift. This was a red 92 NH GLS. I wrapped it in Metallic Black Vinyl and applied the Graphics. If anyone is interested in learning more you can PM me. This is a great way ...

Gday all, Got a new Camper that would weigh close to 1000KGs loaded up. The old girl pulls it quite well on the flat but firsy decent grade has it in fourth and struggling to hold 70kph! Fuel consumption went out the window too! 100k's from 1/4 tank! Am I expecting too much from this little engine ...

you have a PM from me.

Have you got anymore info on this setup. I've never heard of it.

Could Get 500 from the minister of finance mate? Need all switches etc. as well. Hekta....I think the ratios are all wrong for the V6 I have the same 2.5TDI so I'm hoping it will be ok. Would you consider just taking out the whole axle? Mine has a crack so would be killing two birds and all that ...

Hi there can you tell how much you want for the locker? Also What State you in?

Cheers

Burty

Weird, going by my GPS mine is 5 km too fast on 265/70R15 standar size tyres. What's your oopinion on the coopers psycronic? They are on my wish list but I may have to settle for something cheaper as I will ahve to pay to get the camber sorted after the front end lift as well as some new suspension ...

It is a bright orange sticker. So if it is a standard feature of GLS then it wouldn't have an option code on the plate would it as it's not optional? Is it only the rear diff that will be LSD? I got stuck on a muddy hill once and was surprised to see the front wheels spinning at a much slower speed ...

So Will need different rims to offset the width or something? Don't really want to do that. Like my factory alloys. There must be a limit while still using the standard wheels. I don't want massive hardcore truck look just a more competent tourer.

v5mt1 is what th\e plate says. Don't think I have a body lift though. Underneath just looks like the rubber mounts.

Manual.