Outer Limits 4x4 Board

$9500-$10000

Hi All
After having my wizz bang ARB (sure power) dual batt isolator fail (WARM BEERS! ) on me last trip i replaced it with a simple continuous solinoid while still on the road. Now that i have returned i can not seem to find a simple solinoid with spike and surge protection available without all of ...

Hi Guys just wanted to know what seems to be the best worksop manual for a toyota landruiser 100 srries 98 GXL 4.5 litre petrol. Is it the standard toyota one or aftermarket

Cheers

There are only 2 holes. Thanks heaps mate looks like that is the case with the cradle let you know how i go

Hi all has anyone ever fitted a warn 9.5xp (apparantly same as Warn 9000,10000,12000 mounting pattern) to a solid axel 100 series ARB bullbar. Im trying but there must be something missing like a mounting plate???? I am aware that i need to mount the winch bottom bolts through the bullbar to the ...

thanks for the quick reply mate. I thought this would be the case the 100 series do not allow bugger all room through the firewall grommit either so i may even need to drill another hole!!!!

Hi guys
All the gear has rocked up for the job. Started running large feed to back and found it difficult so far using the corri tube for the protection. Is it ok not to use it as it is double insulated flex but it will runnnig next to the main wiring lume any comments would be great as im keen to ...

Hi guys
Was wondering if anyone has used the ARB high lift bullbar adaptor and if so does it fit on the back of a kaymar rear bar on a 100 series (old type). Im alos considering the other type with hook and chain anyone used any of them????

Thanks in advance

cheers for the reply mate im a General A grade sparky so i work in copper mm2 so can someone let me know what auto elc cable converts to in mm2???

THanks

hi all
Just wanted to seek some advice for some work to be done and cable size. I want to run a twin (pos and neg) from the engine pay. I am going fusing it with a suitable rated fuse. I then want to run to a fuse block that will have 3x seperate fuses for 12v outlets which 2 of them will be ...

thanks for the reply mate ive done about 155000km's on original and about to have a crack at the canning stock route so just more peace of mind. Just not sure to see whether or not to change ome shocks or just carry 1x spare for front and back the ones seem fine with no leaks but there are not ...

Hi all
Im trying to decide on what new steering dmaper to get??? I have done a search on this and reading the results has put me off the RTC type my vechile specs are as follows

98 Solid axel petrol 100 series
2.5 OME Lift and shocks and Caster kit
35 inch rubber

I like keeping everythink OME but ...

Hi all i own a 98 4.5 100 series cruiser and have lost the one and only beeper thing to activate and deactivate alarm central lock. I have looked round my local town and everone has said i need to install a whole new system. I have done a google on the brand repeller and have not found to much info ...

Hi All

Ive had some dramas with my ARB air compressor lately it first started when i was using it and it started making a louder noise than usual (almost a grinding sound) and stop pumping air! On inspection i found the plunger valve to be in 100 pieces so that replaced fired it up again. Now it ...

just about to change all oils on my 98 petrol 100 series. Being my first 100 series i was just wondering what are the best oil's for theses cars. I have already got a valv v022 filter and some NGK spark plugs so just need to know gear oil, lsd oil and gearbox/transfer. Are the genuine toyota oil's ...

Thanks for the information xenith. 'Yes" what does this refer to.

Just went for a quick cruise and after getting into a spot of bother i went to switch on ARB compressor to activate the difflock i noticed it was not a smooth sound as normal instead it had a knock every 4-5 seconds after no diiflocks i got out of the situation to check things out to find no air ...

Just went for a quick cruise and after getting into a spot of bother i went to switch on ARB compressor to activate the difflock i noticed it was not a smooth sound as normal instead it had a knock every 4-5 seconds after no diiflocks i got out of the situation to check things out to find no air ...

Hi All. After finally making the move and buying a solid axel GXL petrol 100 series i have now some questions.

1. What are the best workshop manuals for these Haynes, gregory, Toyota????

2. Who make some tube bar\side steps for these. I have heard cheezy make these but i have checked his site and ...