Outer Limits 4x4 Board

It is posible to buy in Australia ??, and where ??

I am from Chile in South America, somebody may help me with this information.

Thanks

CAXTROL

oozuk I have a problem with the registration in the "Pajero 4WD Club of Victoria Public Forum" Somebody may give a help with it Thanks "Dear caxtrol, Unfortunately your registration at Pajero 4WD Club of Victoria Public Forum did not meet our membership requirements. Therefore your registration was ...

any experience ?? or idea ??

Thanks

CAXTROL

Hello friends I write from chile again to tell my project and to do a questions. My Mitsubishi SWB 3.5 SOHC V6 with automatic transmission is placed as follows: T3/T4 turbo with internal Wastegate Intercooler New fuel bomb New fuel regulator External K & N Filter We are now loading 5 PSI, but I ...

Any news about the ARB Air Locker for Mitsu Gen II ??

Thanks

CAXTROL

Thanks Scott Any other opinion about it ??? Thanks CAXTROL Caxtrol I've not had 305/70 tyres, so I can't really advise either way. Theoretically the lower profile should handle a little better, but in reality the sidewalls of both tyres are about the same height, so I don't know that the difference ...

Scott

I know that you have a experience with 285/75/16, but you will recomend me a 305/70/16 or it is enough with 285/75/16 ???

Thanks

CAXTROL

Hi friends I am traying to buy a new set of tires for my Mitsu Gen II, with a 4.90 diff. I have new rings 16/8 with a +12 positive offset, but I need some help with the size of the tire, I have 2 options 285/75/16 or 305/70/16 This new set of tires is for my day to day use, and will be an AT tires ...

And now, how I can measure the difference in kilometers between the normal size of the tires and the new size, because the speedo in kilometers will be differente ??? Thanks CAXTROL Just for fun, I made a system of equations, and I finally came to a very simple formula: If you assume that the ...

Any help....
Thanks

CAXTROL

The other day I turned on the light, and completely fill the tank and went 65 liters, by catalog says that the tank makes 75, so I think that once it is turned on must be on average 10 liters.

Any other experience with the light.

Greetings

CAXTROL

Hi somebody knows gears range reduction of Pajero SWB GEN II 4sp automatic (V4AW3) Transmission

1st gear ratio
2 gear ratio
3 gera ratio
4 gear ratio
Rev gear ratio

Thanks

CAXTROL

Hi

Somebody knows how many liter we have in the tank when the petrol light reserve is on in a Pajero SWB gen II ??

Thanks

CAXTROL

Hi blown26paj I have a cousin that have a garage with a Dyno a very good mechanics, He has 2 rally car in Chile (Subaru STI), and the other day he told me the possibility to play with the electronic in my Mitsu (the mechanis have a lot of experience with electronic in special with a programable ECU ...

Any experience ??

Thanks

Caxtrol

Hi friends

I am collecting information about the programmable ECU performance, somebody has a experience with Motec, Autotronics, or other aftermarket brand ??

If you have information or experience, may you share it.

Thanks

Caxtrol

Thanks Scott

It is a good question if the rear door (heavy) it is a structural part ??

somebody has an idea about it

what do you think about the bonnet, every time that I need to open I feel that it is too much heavy, I am thinking in a fiber bonnet.

I am waiting for more ideas.

Thanks

Caxtrol

Hi Guys I'm trying to assemble a Mitsu for competition in Chile, and today I find that this weighs as much, thinking that we have to put extra tank and a roll cage. The Mitsu is a robust 4x4, but is heavy in its category, so I need to get ideas from the weight. :roll: In Chile there is no J-Top, but ...

Hi Guys I need some help with ideas to take out weight in my SWB Gen II, I feel it is too heavy, and with less weight probably it performance will improve. It is a 3.5 V6 SWB Hard Top with 33x12.5 and 4.90 diff. One option is to change the metal bonnet by a fiber bonnet take out the rear seats ...

Dear all

I have to change the Rear Diff LSD Oil, but I dont know the oil sprecification for a LSD.

I have a doubt between Oil for LSD 80w-90 or 75W-140, both API 5

May you help me ???

Thanks

Caxtrol

Hi

I have the possibility to change the old Torsion Bars from my Mitsu 3.5 V6 for a OME Torsion Bars, somebody may explain me what I will gain with it change ???

I will gain something or I will waist my money.

Thanks

Caxtrol

Hi

Somebody has the 3.5 SOHC V6 - 4sp auto (V4AW3) Transmission gear:

1st Gear ????
2 Gear ????
3 Gear ???
4 Gear ????
Rev gerar ????

Thanks

Caxtrol

Ok I will buy 33x12.5 !!!!!!!!!!!!!!!!!! Thanks One more question my friends, what does mean "All good except low range gearing when winching. (too high)" Do you talk about the retention of my Mitsu with 33x12.5 with 4.90 diff ??? or the word "winching" it is the action to use the winch ???? May you ...

Any other experience or opinions about

33x12.5 or 32x11.5 with 3.5 V6 and 4.90 Diff ratio.............

Thanks CapnCrunch for your last email.

Thanks for the responses What about the drive train, it is to heavy 33x12.5 ???, I will have problems with it size in a short time ??? And for the gas and power performance, what is more important: 1) more wide and less tall or 2) Less wide and more tall I think probably 32x11.5 it is the size for ...

Good morning friends I got 4.90 DIFF for my auto SWB year 98 with a 3.5 V6, BUT now I need some help with the tire size ????? What do you recomend for mi Mitsu auto SWB 3.5 V6 with 4.90 Diff ratio: 33x12.5 ( too much heavy for the drive train components ????, and for the 3.5 V6 enginne) Or 32x11.5 ...

Ok, if I have 33` the diference is nothing, and I will not have a problem with 4.875 in the front and 4.90 in the rear ????

It is correct ???

Thanks again

Caxtrol

Ok

I do not have free wheeling hubs and I used super select, because my Mitsu is year 98, and for this reason I am understanding that I can not use 4.875 in the fron and 4.90 in the rear, I am thinking in the correct way ????

Thanks

Caxtrol

Hey Guys I have a short Mitsu 98 with 3.5 V6 and 4.27 Diff Ratio. I got a 4.88 front diff from a Short Mitsu 94 3.0 V6, but I found a Rear Diff from 2.8 TDI in 4.90.... My question is for the rear diff, it is the same 4.88 with 4.90 ???, because I saw in the Forum that: 3.5V6 & 2.8TDI :- front axle ...

but it would have been better if i had stuck with the 4.27's and swapped in a t-case instead. Why toastmaster ??? What happens if I run 32x11.5 with my V6 3.5 and 4.27 Diff Ratio ??? or 31x12.5 ??? I found a Front 4.9 Diff Ratio here in Chile, but I can not find yet 4.9 rear diiff ratio. What do you ...