Outer Limits 4x4 Board

thats such a good looking rig . . do you have any other photos you would be able to post up so i could have a look? . . Did you run 33x12.5x15 or 33x10.5x15?

Thanks heaps mate

Simon

try a thermo fan

nice looking bus mate I like the look of those rockys! was that front bar a bolt up fit!!?

Thanks for that mate yeah a tube rear bar with tyre carrier is getting planned right now and some sliders and scrub bars :) . With the 3" lift did you have any problems with the front end being wound up so high, did any tie rods or the idler arm keep getting worn out?

What do you reckon i should ...

feroza looks good mate, I'm running 40mm tough dog springs in the back of mine with adjustable shocks and 2" body lift with 30" muddies. how did you go about getting 3" out of the suspension?

nice paj to

hey specs could you post a pic or 2 up of your feroza? would be good to see a few pics of it with all those mods

G'day,

Just wondering if 32x11.5x15s will fit on a feroza widetrack. I have a 2" body lift and a 2" tough dog suspension lift and i'm currently running 30" maxxis buckshot mudders and there is no scrubbing what so ever.

Any advice would be greatly appreciated.

Cheers,

Simon

ask them for the silverstone extremes. they come in a 31x10.5x15 which would fit nice with a 2" spring lift and 2" body lift. They have the same tread pattern as the mongrels and the simex centipedes.

the website is www.4h.com.au they are under the tires section. They are only 250 a corner ...

cheers mate!

I have an aftermarket Safari snorkel on my feroza,

i found that an older model pajero idler arm fitted, they are slightly shorter, so you may have to grind 2mm from the chassis, but i got a new one off a spare parts feroza i bought.

yeah nothane make bushes for the pajero one also. \

I need one for my feroza to. Do you know what year the pajero ...

No worries mate, thanks for that. What material did you use to make them? Did they also give you anymore lift in the front end?

Cheers mate

G'day guys,

I was wondering if somebody could post the specs up on how they made the spacers. If they didn't make them where could i get some from?

Much appreciated,

Simon

Sounds like a weapon mate, post a few pics up

hey mate, i own a feroza mines a 1994 model its an SX 2 widebody. They come with a carby or fuel injected. The fuel injected one is the better pic. Also the exhaust manifolds are prone to cracking, it will whistle if it is. You won't have to many problems with them as Daihatsu was made by toyota ...

PM sent MM

Gday I'm Simon form Hobart Tasmania and I drive a 1994 Feroza Wide track. So far I have done to it:

40mm Toughdog lift adjustable rears and gas fronts
50mm body lift
30" Maxxis Mudders on white 15x7 sunnies
Safari snorkel
Tube bar

To do in the very near future:
Lightforce 170s
roof rack and basket ...

A few more as promised

How i mounted my indicators:

Getting built:

No worries at all mate, i'll take some new ones tomorrow for you

Hey mate i made a tube bar for mine its pretty easy as long as you can weld supports on and that its pretty simple. Where the hole is in the middle is where the winch is going to sit and the fair lead has to screw onto.

Heres a few pics of mine this was before i put the LED indicators on and put ...

yeah been quoted 410 a pair delivered will be doing the rear for now as they are the worst and then the fronts in a couple of weeks, id rather pay the extra and get the quality got quoted as low as 78 each for kyb but id imagine the would be crap

yeah that would be the way to go mate, I ran a ...

i run toughdog gas ones in the front of mine and toughdog adjustables in the rear of my widetrack rides really good

MM, would a commodore v6 fit with an auto box and hilux transfer?

what bar would bolt onto a feroza? are the mounts different to the rocy mounts?

Yeah mate they should fit can't see why it wouldnt as the guard shape is the same should be right

I have looked at that snorkel on Ebay. It looks good. I think its quite cheep. What was the overall cost shipping etc if you don't mind me asking. Thanks

Yeah was pretty cheap mate, it cost $59 bucks to ship it to tassie and i think it was $210 for the actual snorkel, it fits really well. I can ...

nebivedu wrote:this safari snorkel is from? (mitsubishi, toyota, ...)?

its a daihatsu feroza snorkel from Safari, i got it off ebay

Shambles wrote:looks good, how much did it set you back?

cheers mate, it set me back 270 bucks brand new

Installed my safari snorkel this weekend. . Though't id share with you guys

MightyMouse wrote:SEARCH
For the millionth time - Airflow make one.
I know i've got prototype 1 on my roza

Yeah i looked on the snorle;s.com.au site and they only have rocky ones. I thought they were a different snorkel thats all mightymouse? can you confirm that the rocky one fits the feroza?