Outer Limits 4x4 Board

nar its the stock one still, the rocky still sits fine, any more lift an i would need an adjustable one, u will be fine,

i had 2inch body life an 2inch lifted springs on my other rocky, an i pulled out the panhard it flexed alot better and worked well offroad,

my current rocky just has 2inch efs lift thats all and i had taken the panhard out but put it back in because i found when i had my tool trailer on or even ...

cheers aj but all sorted getting done tonight just used a metric bolt worked fine to remove the drums pads had heaps of meat left on them, thanks for the help.

yea thanks nar i know i've checked all that just wanted to know how the shoes could be adjusted so that there out further closer to the drum itself, think i've sorted it out anyway.

just wondering if anyone can tell me how to make my pedal harder so it dosn't go down so far and so i dont have to give it a pump before i actually break, i dont think i need to bleed anything ive taken the small rubber grommet of the inside of the drum housing but not to sure where i go from there ...

efs 2inch lift new everything shocks springs bushes ubolts nuts ect,

$1200bucks cost me took me half a day to put it all in,

i wouldn't worry about it ever getting soft and sagging, ive got a steel arb bullbar with winch an lights, front hasn't dropped at all, and i found it wouldn't flex enough ...

if the standard bundy setup will work well or am i better of cutting of the stock arms and mounts and running arftermarket arms, and did you have any probems with the fuel tank being in the way?
and with the front arms does it matter if they were shortened because they finish right where my g'box ...

g,day anyone done a coil conversion just trying to get some more info before i get started,
i have had a ruff measure up of the 2 and everything should work just thought someone may had already done one would be good to get some info and photos or come have a look,

I AM AFTER A SWB CHASSIS IF ...

yes i know the one now your talking about, yes its in braeside. cheers.

where abouts is this wreckers located??

AVAILABLE

for sale stuff goes here

WANTED

im after a Rocky f70 SWB Chassis only any condition could care its not ever going to be used properly just used to mock up everything before i start the real one. any help would be great thanks
Once again if anyone has some WHEEL ARCH FLARES please ...

yea cheers, i know that the fixed fan the standard one, should have been sitting closer to the rad when it was designed cuz if u look it sits to far away i think,
its not really that im pushing it so hard but even sitting on 100kms on a straight rd it shouldn't get hot then thats my main worry, i ...

g,day everyone,
just considering putting a slightly larger rad in my 84 turbo rocky and pissing off the fan to run a large thermo instead, this all came about after i want away about 2 weeks ago camping car was full had trailer on with bike an stuff in trailer also, car pulled it fine no worry's ...

i love these post's where people are so excited about putting in lockers until they come back and read there reply comments the next day and go aw fuk thats gay!!

if u want a cheaper option just do a body lift buy those blocks of ebay cheap as chips fairly easy to do also.

i have a 2inch lift efs setup cost me $1200 new everything

interested in your home made lockers got some info about them would be great thanks..

lol didnt take ya loong!!

up forsale again anyone interested pm me. can post anywhere in oz

these are good setups instead of running full bost all the time now it only sits on 3-4psi on 100kms...

thanks again....

haha fair enough..

setup may have gone to someone already sorry anyone who was interested..
keep u posted tho.

g,day everyone just finished my t28 conversion on my rocky f70td.
Im thinking of selling it as a kit and if goes well making another one and might make some more..
i wouldnt be selling my inter cooler so the only fab u would have to do is get a bend to run up from the turbo into the inlet manifold ...

thanks mate just wondering how much u payed for the set of rhyno onces mate??

u wont need to change the pump at all just get it tuned once u have the turbo setup u will need to also get an oil pickup line an weld in a plug in your sump for an oil return line.. u may have problems with overheating the factory turbo motors has a setup where oil was injected (sprayed) under the ...

extended shackle's has anyone made some or know were to chase a set up or if there is another car that runs the same type of shackel? i was going to make some up just wanted to ask around first off..

AVAILABLE
nothing for now


WANTED
as above i said rocky ute or lwb cab. any condition as long as not completly stuffed lol tell me what u got can be just rolling shell??????

and also wanted are a set of diahatsu f70-75 plastic original wheel arch flairs trying to chase a complete set but i u ...

hey mate did u cut down the 60's diffs because i know u have flairs on but it dosnt look like the wheels sit out very far from the guards at all?

thanks champ..

g,day guys just wondering if anyone has a set or knows of someone that might maby a wreckers cuz im having trouble finding a set for my rocky, they are the plastic ones that clip up onto the guard usually always black in colour,im guessing there about inch an a half to 2inches wide. thanks to anyone ...

i havn't seen one of these diffs if they differ to rocky ones but just pull the whole thing out an weld the spider gears together on the corners locked an loaded but i havnt seen one in the flesh so

anyone interested???

highway tyres mate there king rims f100 set. $75-80 bucks each from memory.

i actually just took them off my rocky tonight an put on my alloy rims with micky thompson baja claws i'll put some pics up tomorrow night of them..