Outer Limits 4x4 Board

I just picked up a cheap highmount. I have had a read over all of the different mods you can do to them but i cant how far i should do.... I am going to get drum wided, air free spool and bracing. Also will be putting on a 6hp motor, strengthen mainshaft kit. Would else would people recommend?? All ...

I have seen for sale on the internet a warn highmount for sale. but in the picture the control solanoied pack it saids thomas. would this just be a old school warn highmount? It looks fairly old. Would this fine for a rebuild?

thanks
steve

You dont have to use gussets. You just have to stagger your joins 10cm's apart for each layer. (i used to be a panel beater and thats what we are taught at school/ work)

Where in melbourne are you located i might be able to give you some advice if you want

i payed 2k for both gu diff's complete 3 years ago

i have put in a GU front + rear diff and gu sterring box and sterring pump. The panard rods if you got after market ones you just need to change the ends and then they pritty much bolt up i have the diff's with the 4.6 ratios and it makes HUGE difference. The brakes are heaps better i had a look at ...

I have just been looking over the truck today. I have noticed that on the dizzy cap there is the 6 leads which go to the motor and then 1 to igination coil and then there is one little nipple left about 3 mm in size what is this for?? whats surpost to be on there??

steve

mine cracked in the same spot too. Mig welded it up about 2 months later cracked again.

I purchased some new tyres today (maxxis big hornss)

Now i need to buy some new rims now. Now should i get a 15x8 or 15x8.5 or 15x9? i also want to get it at the landcruiser offset just to make sure this is -22?? is that correct?

thanks steve

that is one very good video music wasnt over powering!!

When do you expect to have the full release finished ??

i vote that this ether goes in the bible or post is sticky!!!!

go down to pick pay and go (in ringwood) and just look along the fence line (opposit side to where you walk in)

The other week they had some spare wheel carriers off random cars just on the ground i bought one $15 worth the look!

I need to get a car regased 1997 toyota corolla had a new condensor installed. Need to find someone who can do it tomorrow (monday) or even if they want they can come to me today.

Hopefuly someone here knows someone who can do in my area really urgent!

thanks steve
0421788446

just break the bead on the tyre and put a tube in no harm done! no problem doing that!

On my GQ when i got it i didnt notice the bent diff housing until i fitting the 35's. Wheel alingment didnt show it up but was making the tyre scrub on the body only on one side.

Also if the old owner offered you a Diff housing it sounds like he knew about it!!!!!!!

i was hopeing someone here would recommend someone. I have had been to random rwc places before and they just find things so they can get some work!

i just picked up a 1997 toyota corolla and just did a check over the car fixed all of the bits that would need attention. I just need someone down frankston way to do a RWC on the car.

So if anyone has any recommend places please send us some details.

thanks
steve

thats the problem i have had a turbo car once before (mazda familia) and i do love the dose and turbo spool. But then i do go in a friends 4b which has a 5litre and it does sound good. just not sure........

Now i am sure this might of been covered once before but i cant find it. Now i have a GQ 4.2 carbi petrol / gas. I had a brand new head put on 2 years ago, custom cam made up, ice ignitition system. Has been dynoed up and they were happy with the power it was putting out. So 2 years later on i now i...

If only you were down in melbourne!! i know of 3 people who would of come for sure...

Ow well next time!

EBAY that the people make up your mind

It is a custom camshaft that PGS make.

Give joel a call and speak to him.

I have a 4.2 carbi petrol/gas and when i got the guys from PGS 4wd put the new head on they also put in a camshaft and OMG what a difference in power!!! highly recommend it!

normaly those are blanked out for extra's. Someone has put in some extra switchs. i have the same switchs that run my driving lights. but you can wire them up to anything

i must say that is a very clean ute chop. do you find much water coming through those vents??

Would you be able to put all of your photos up on a site like photobucket or something this is EXACTLY what i was going to do.

Thanks for the pictures!

Give Joel and James a call at PGS they did my car wonders i had the same problem as you.

i would love to see some more pictures of the ute chop with the navara rear end looks like its a good fit.

What did you do about where the rear door used to be just weld the door up?

X 2 highly recommended

Tuflux308 wrote:After seeing a lot of Joel's work at PGS 4wd i would not even consider going anywhere else especially tb 42, infact all efi work

PGS 4WD
20 Bennetts Rd,
Mornington, VIC 3931

Phone:(03) 5975 2642

I am thinking of putting the patrol on straight gas just been having alot of problems with the dual fuel and petrol never works. So are there any side affects if i run the car on straight gas??

If i was to do this what type of tank have people put in there car to get better range?

steve

i was told the same thing they are exactly the same pumps but i recone there might be slight differences and being newer it might help