Outer Limits 4x4 Board

:oops: Sorry guys,I couldnt get back to thank you for your input,Had to take wife to hospital.Anyway you have answered my query and I now have a good idea of what to get.As i stated the f***ing thing was just dumping fuel down the throat and you couldnt drive of for 4 to 5 minutes and it was pi**ing ...

:twisted: Just removed carby, stripped down and cleaned eveything possible.Put carby back on and it started and went to fast idle and choke partly open.Looking good.Warm and a 5k drive all ok.Then yesterday arvo started up no fast idle choke closed and virtually raw fuel getting dumped down its ...

Sorry I didnt get back to yous earlier.From what you people have said looks 2 inch is the go and I will sus mufflers from exhaust shop.Thanx again.

Would 2 in make to much noise as in more noise you think you have got more power.Inch and a half ? gives back pressure not too noisey?Your honest opinion, dont wont coppers attracted to me.

:P What brand of bearings for the rear do you guys recommend for the rear of 92 w/t and part no. and also preference of extractor brand and size and configurations of exhaust systems.Have read alot about 4 into2 into1 etc for lowdown etc etc. I need a new system as the muffler is on it way out so I ...

Thanks for the info.Seems like my mate is going to suck it and see what evenuates.eg noise gets louder will spend the money.
Thanks again.

Mate at work was telling me that the noise he has had in the front is wheel bearings on the way out.He then was told that he has to replace hubs as well as they are one unit at $750 t gst each.
Anyone know of this occurrence and cheaper way to repair it.

:P If my memory is correct,the winch you are talking about will have a 2 round rails from rear of winch body to front of winch body and shafts and uni joints from T/case.If Iam correct your pto lever is mounted on the leftside of trans tunnell.It should have a metal retaining gaurd that you flip ...

Seems like broken rear axle after much talking on the phone and which gear selection.Find out 2wd diff lock out gives no drive and 2wd diff lock in gives drive.Just gunna work out which axle.
Such is life.

:? Mate called me to say that 1999 toyo tray with factory diff locks has decided to neutralise everything,as in lockers out position no drive to front or rear.Lockers in L4wd drives along ok.Lockers out H4wd ,1st,2nd etc ,No drive.Anyone heard of this and can let me know as i will tell him tommorrow ...

:? Nicbeer said a carbie of a 4k corrola motor would fit on the a zook but do these bolt up pretty easy or is there a few adjustments/mods you need to carry out.Reason Im asking as mates zook has no choke function and it has been a PIA to get the choke plate to move to give choke for cold starts.Its ...

Thanx guys.I will ring suziworx in the next coupla days and order some .Thanx again.
Leafyhead.

Was wondering where do you buy replacement rubber shackle bushes.I know people are going to say the fors and againsts urethane but I want rubber thank you.Do I go genuine or does repco or the likes sell them.
Any info would be great.

Leafyhead.

:cool: Had the same problem with me 92 sierra.take the lever out and then the 4 bolts to remove top cover.In here is 2 spring detents with ball bearings.I found that a quick file of the surface the ball rolls on to give the detent , was all that i needed to do and a bit or grease and it works like ...

I know this probably should be in the for sales but just a quick one to let people know that you can still buy cheapys for projects or parts.In the Land newspaper 5/05/05; 2X Suzuki table top utes,6/96 and 12/85,both go but in rough cond $3300 the pair ono.Ph 68479106. Maybe someone ideal start for ...

I have put 2.5 king springs under my 92 soft top and the original shocks topped out.So with a few measurements from the old shocks i now have a set of OME rear pajero in the rear and my old rear prado shocks in the front.You need to fit bushes to go down to 15mm but OME has all these.It actually ...

Was just over at supacheap autos and they had a sierra 1.3 starter in a box re-manufactured cant remember brand name for $50.Is that a reasonable price?? I thought that was pretty cheap.

Cheering,that sounds exactly whats going on.I will fix it this arvo.
Thanx very much eveyone.

Yeah I will do that this arvo.Blown fuse you think?

Quick drive to the bottlo last night,put my foot on the brake and the high beam indicator on the dash lit up.Turned on headlights on low beam and the light stayed on but when flicked to high beam light went out and high beam was on at head lights.Also no brake lights.Bad earth?? as I havent touched ...

Yes,i will ring before hand thanx.

Thanx podge.I will be near there on the weekend.I will go and check it out.
Leafyhead.

Sorry I took so long to get back but i was out of the workshop.So genuine is the way to go.Thanks for that info.I will order the parts today.

Wondering where should i go to buy the rubber seal and felt seals for the front swivel housings.Genuine or say repco?The axle oil seals are leaking so i thought I would do the lot(bearings too!). So any help would be appreciated.

Leafyhead

Christover,thanx for that but i still tend to think valve stem seals as full vacuum could be pulling oil past seal into cylinder.Everything else is new ,so if i have to put stem seals in i will use compressed air in cylinder and try my luck.Thanx again.
Scott.

Have read something in this forum about no3 cylinder.Now cant remember wether it was about compression or what but on the weekend running down hill 3rd gear small smoke trail and then bit more smoky as i accelerated.Pulled out plugs and no3 was darker than others but not oily.Valve stem seals i am ...

50 bucks sounds like the money.I have already PM you Built4thrasing.Once again you blokes have helped an old bloke again.Thankx.

Built4thrashing, didnt read your post till now and after what i said in previous post i had the uphill flooding problem on the weekend.Stuck in creek trying to go up bank \,light throttle,stalled,then about 6 or 7 times it started and black smoke and missing.So now i know what not to do.

I have an 86 sierra on my property that has a weber and i cant really find any dramas with it.Other people have said starvation of fuel on uphills etc but i go up and down hills 20 degrees to 35 degrees and back down with only valve stem seals letting oil into the cylinder causing a bit of smoke.I ...

Squik,thanks for that ,sounds ok for 100 bucks for front and rear as i am on some sort of a budget. Ithink so as the missus says stop wasting money on this and that and other associated parafanalia. You guys would now what i mean.