Outer Limits 4x4 Board

Hey all, need some tips if there are any that is needed for pulling a 80 series outer and inner P/S side fender off. my inner has split in two making my battery sink and inner guard going closer to the tyre lol. oh and anyone know anyone wrecking or can supply a outer non flare PS side guard? they ...

my 2c i have a ferret and have had no issues using it on my 80 and the zook. i usually a check fairly regualy pressure checks as its not a daily driver. i let it down by counting and a quick check after with the gauge, fine tune with stick if needed but usually not. Mate has the ARB one, it seems ...

havent had the bridging pin issue yet.

im using some ones i ripped out of old PC front panels, they usually screw in and have terminanton cables,

Hey Dools, Yeh for sure if u arent using it.. Its for a USB power only sockets i have installed into a custom console, running 3 sockets and trying to allow about 1-1.5 amps each socket as almost killed the 1amp kit on the weekend charging my phone and mp3 player. PM me on perth4x4 if u like, im on ...

Hey all,

Im after a 5v supply coming from 12v that will give approx 3amps or more.

possible? also cheap as possible..

ive tried the LM7805 reg using jaycar kit and works ok but not enough amperage.

thanks

have u got the dash out of vit?

if so then u can swap the vss over from the cluster. if not u can run it without it ok but may have a slight miss under load i have heard

goi the higher one.

does width play a part in this too?

hey,

ive seem to have lost the spare key inc immob

i know the immob was/is a autowatch so will follow that up.

where to get new keys cut/bought?

its for a 97 dx, key is square in profile like a double key

will the frp ones fit on a std/dx that doesnt have the std gxl flares?

12ish if u are in WA.

had a better look under there.

looks to be normal maybe hanging like that?

anyone else got a diesel with std twin tanks that can do a pic or have a look for me.

appears to be maybe the std main tank breather

umm no.

Rear end. above rear diff

would not know.

Most cars ive had drain near the front of the cabin for the AC.

going to go under and have another look today

Sierra?

If so i know dome of the US sites list a seat belt webbing style that wont be noisy...

i took them off mine and didnt run any.

Hey, Was under the 80 tonight and found this hose floating. me being newish to toyos i could not find anywhere it connects up too. The pic is from the back and looking up where the diesel hoses come out of the body tunnel. i beleive its the far left one with a black filter looking thing. or is this ...

Hey all, Im replacing a dash cluster with a more upper spec model but it has about triple the k's on it. mines got 88 and this has 24xk on it. 97 GXL cruiser Electronic driven speedo ANyone done a wind back or have any ideas? Your sig says you have a 97 DX and you are replacing the cluster with a ...

Yamaha, only just seen updated post.

Killalux, cheers for the info, will be trying this soon, i am guessing that if u take the plug out of the back and mine power this can be done in situ?

can the alt be run without the rear cover one for testing?

Hey all,

Im replacing a dash cluster with a more upper spec model but it has about triple the k's on it. mines got 88 and this has 24xk on it.

97 GXL cruiser Electronic driven speedo

ANyone done a wind back or have any ideas?

Hey all, Anyone used the recovery mounts from BBM? http://www.bbmmotorsports.com.au/thumbnaillarge/wsOB100.jpg If so im guessing you are using shackles in the holes or equaliser? Im running a steel bar (similar to ARB) and knowing the normal hook style wont match with the holes to bolt up unless i ...

hrmmm so noone has done it before

Can it be done with no internal alternator mods. I have got hold of a diesel tacho that is meant for the alternator not injection pump. Auto-Gauge brand Mines a std so does not have the inj pump output for tach. AFAIK std Denso alternator, pic below for reference. http://img256.imageshack.us/img256 ...

late 80 TD sahara

Marty SOC RACING wrote:hey mate dont put it in your cab put it under the bonnet

Space is limited...

Diesel with dual batts and custom wire/relay box up on guard on PS.

i will have another attack at this thou

Bout same here. I have just bought similar gear direct from china. Reverse cam was about 20US and the 7"touchscreen with 2 AV inputs was 90USD LinkLinkLink!! I got it direct from here. http://www.szzhiyuan.com/sdp/817796/4/pl-4310262/0-1885896/Car_LCD_MONITOR_Camera.html They were good to deal with ...

Bout same here.

I have just bought similar gear direct from china.

Reverse cam was about 20US and the 7"touchscreen with 2 AV inputs was 90USD

Hey, Considering mounting my ARB (new style) compressor incab (posb under center console or in new rear draws. what do everyone do when they have incab mounted and run air-lockers, with regards to the connections to the solenoids. I have thoughts to run a ~9L airtank (already got) underneath and run ...

Hey,

Are the seat rails or mounting the same between the 80 and the 75, esp the drivers seat.

even if the runners are the same but the seat bolt spacing is the same...?

Have u talked to an engineer ?

Hey,

has anyone done remote unlock/lock of the barn doors in an 80?

I dont have central locking and is still a consideration to fit but looking at doing just the barn door with switch on dash for now.

Nic

Should they be cleaned as a maintenance thing?

80 1hz, only done 88k but mostly offroad i beleive.