Outer Limits 4x4 Board

To add, I was extremely dissapointed with how tough dog handled it. mine from another thread. Stay away from tough dogs. Mine lasted 2 trips and told no warranty on anything over 3''. Was later told by same shop (on another forum after I posted that info) that they should of been replaced under ...

i thought the gu lower arms were about 10-15mm longer.? anyone know for sure.

Stay away from tough dogs. Mine lasted 2 trips and told no warranty on anything over 3''. Was later told by same shop (on another forum after I posted that info) that they should of been replaced under warranty and it was their salesmans misinformation. Never got any replacements or even an offer ...

get on to Paul from Kustom kages and engineering mate. he has opened a shop down that way now. he has been doing chops for years.

Thanks guys. I'm going up to see Stools troll this week - throw the tape measure over it and my ute and see how big a headache it's going to be. I've seen (on the internet, where everything is true :shock: ) a few 40's and 45's with the big block, can't recall a 75 with one though. What ratios were ...

I have a 98 injected 454 in my gq. a very very tight fit, drivers exhaust had to be changed to run forward and around the front of eng as it smashed the starter on flex. everything is very tight. had a marks man adaption and smashed it so currently is matted to a gu auto. feel free to ask anything ...

flywheels are different mate. 1 has 6 holes and a dowel , the other has 7 holes and a dowel. not sure which is which though but they are definately different.

outlaws (Lees) old truck.? he runs buds now.

loks good mate. i wont make it now unfortunately. enjoy the weekend though.

Just sent the request thing on fbook. Guy I work with just bought a flat bed so it will just fit on the back of it if need be.
I don't have a winch in the bus yet either if that matters.?

We are working in gladdy atm. Will come check this out if we are here that weekend. Will keep an eye out in case someone needs a late car.

mine is a 454 and the gu 3lt auto runs a stand alone computer. it is fully programmable, has a lock up torque conv and is also triptronic/fully manualised with a rocker switch for up/down gears as well as a standard drive in D dept. i will be fitting a gu shifter to allow a better use of the ...

mine is a 454 and the gu 3lt auto runs a stand alone computer. it is fully programmable, has a lock up torque conv and is also triptronic/fully manualised with a rocker switch for up/down gears as well as a standard drive in D dept. i will be fitting a gu shifter to allow a better use of the ...

thinkin of selling my 5 link if anyone is interested. ? PM me if you are interested.

The 3.0's torque converter does not like the 6.5L chev diesels. I'd hate to see how long one would last behind your donk. I spoke to a fair few auto guys and they all reckon the 3lt is the best option as the torque converter is the biggest/best. the box runs 4 main cogs so to speak instead of 3 ...

well it can be done in a gq wagon with a few bits and pieces. fitted and running now.

anyone have a v8 fitted to their gu 3lt auto.?
if so did you use the standard torque converter.?
if so any feedback.?
what is it like through the gear changes with the factory computer etc.?
pro's or cons.?

thanks in advance.

i had a 5 link and a wizard aframe in my old bus. was pretty rolly floaty but that is how i wanted it. it was good when i fitted the sway bars etc and we raced it for 3 years at the allterrain and many many glasshouse, cruiser pk trips. my a frame was great. IN MY OPINION......the a frame didnt give ...

you can pull the holden pump apart and stretch the springs internally and space it with a very small washer and it works heaps better. mine is fine but it sounds like you may have a different issue somewhere though.

my bb chev is 2 x 2 1/2 into a 3" with a striaght through muffler with a slight off set. finishes in front of the rear diff so about as long as a shorty. I grabbed a stainless muffler as the shop had one there and it was only $10 more than a standard one. Here is a vid from the beerwah skids, excuse ...

I say bring back the smaller trucks, it's tuff truck not tuff monster truck or tuff bank balance. I love watching the little battler giving it everything at tuff truck, like that near full bodied red Gq last year, what a champion. And some Of the duel cab lux's that show up every year are still ...

I say bring back the smaller trucks, it's tuff truck not tuff monster truck or tuff bank balance. I love watching the little battler giving it everything at tuff truck, like that near full bodied red Gq last year, what a champion. And some Of the duel cab lux's that show up every year are still ...

i have 1 in se qld if that help. i dont know where you are though. can you take your disc to the local libary/officeworks/newsagent/snap printing and print what you need there.?

also check your fan is working properly. bro in law had a 2.8 that would only heat up on the highway as well and his clutch fan was shagged. i would of thought it would heat up around town but it was fine and only got hot on the h/way.

a mate of mine (Paul again) modified mine for me. He is ShortyIQ genius :armsup: :armsup: it originally came with the headers but the diff hit them and smashed the starter motor and bingo fire in eng bay. make sure you use a proper holden starter as the multifit ones off ebay are a curse.depends on ...

I am running a 454 injected vortec as well... :armsup: was told by the dyno guys that anything under 4'' is a waste of time. I will be doing ( my mate Paul who can built these) a double 3'' up through the corners of the bonnet into an airbox with a internal pod hopefully, but will be ages yet.. this ...

Thats a sweeet idea! Might throw one in the TT! I still hate th400s - old shite from the 60's and spending 10k on one makes me want to gag. Gq box is strong as! and a dime a dozen! Bit of a hijack but I wonder if the autos can be built strong? cheers bru I looked at putting a nissan auto behind my ...

i have a g/box and a transfer seperated in the shed. i can take some pics etc and any measurements you need if you want me to when i get home.

Would this be an example of cheap chinese crap??? Or would it be worth a shot. Comes with 12 month warranty against manufacture defects. http://www.ebay.com.au/itm/3-CORE-aluminum-radiator-Nissan-GQ-PATROL-4-2-DIESEL-/290599123545?pt=AU_Car_Parts_Accessories&hash=item43a90eba59" onclick="window ...

I must agree guys.... :cry: . Had so much fun when we raced and everyone involved from the officials to the competitors made it not just a race but an event. Met some awesome people through the event and even though we havnt been in a position to race for a few years we always had plans of being ...