Outer Limits 4x4 Board

I have looked there but nothing that fits. Believe there are aftermarket ones but not sure where to get them

Dose anyone know where to get new window rubbers for a 40 sires LC. I am looking for rubbers for the barn door windows an the side windows on the turret. Also looking for front door window belts. This is the only thing stopping my LC get on the road :cry: your help would be greatly appreciated ...

After several years of hold ups and delays I am now bolting my Landcruiser BJ42 back together. It has been a while since I pulled it apart and some of the bags have deteriorated and all the bolts and screws are in one big mess. It was also partly disassembled when I bought it. Help with bolt and ...

Just a quick one to all of you who help big thanks. It was dirty contacts in the edic motor and now it starts first time and stops as soon as you turn the key off. So again big thanks

Nathan

do you know a good sparky that does house calls

I have just about finished a rebuild and need to get a roadworthy certificate, will a cable control pass.

any tips on fixing the EDIC

I did try to only loosen the injectors and i do know this does work but it didn't work for me. i did just try what was suggested above and success. i have another with starting and before anyone says that was the problem it was in the start position and not the stop when i had the fuel issue. The ...

no. I will try it tomorrow. when you say cracked the injectors, is that where you loosen off the injector lines from the injectors.

I had not started it for about 6 months and the fuel gage was on E. I have put more fuel in but still wont go. I have tried to use the priming pump but nothing (note the priming pump does like a little can this be a problem) My 40 is in the middle of a rebuild and every time i have moved it, it has ...

thanks for the replies now i have somewhere to start. any further info would be greatly appreciated.

sorry forgot to state it is a short 40 81, Turrent to tub, roof to turrent, bonnet hinges, front door hinges, are the main ones i need to know

The landcruiser i bought had most of the bolts removed. I have the micro fiche on pdf and it tells me a part number bur not a description of the size of the bolt can some one help me please