Outer Limits 4x4 Board

If interested, I have a 'LOKKA' part number LR13 brand new in box from 4wd systems which I am not using. $550 and I could post it anywhere in Australia. Bought it for a 1987 BJ73, will fit most cruisers (NON LSD)

thanks crusty

reason is i ordered a LOKKA but the part number is the same as one i already fitted in the front. i though the diffs were different

thanks again

Hello, I have a K082 rear diff
Is this open or limited slip?
I know it's a 9.5" and 4.11:1

Thanks
Sam

yeah, i contacted them over in the states and all they need is an axle length and they can make them to suit

anyway, still deciding
*better cv's?
*change driving style?
*rear lokka?
*all of the above


thanks for the replys

thanks everyone for your info and assistance. please keep the comments coming. I am now weighing my options and will contact locktup soon. P.S Maxxi, that was definately the worst hill my middy has been on. I was very happy i got that far up! I will go back and try again after some mods are done ...

Hey all, Yes, I have a BJ73 non turbo 3B with 34 11.5 x 15inch simex and front 'Lokka'. Out of 3 trips I have broken the RH CV twice. On both occasions it struggled on a rocky hill climb and after 2-3 attempts it went bang. What am I doing wrong? I know its a weak point on Toyota's but maybe its a ...

thanks for the helpful replies, I have ordered the bush through Toyota. I work for them, so I get a hefty discount on parts. sweet.

can anyone help me with this question????
On the back of the knuckle spindle there is a brass bush.
Mine is flogged. Broke a CV and demolished an axle on the last trip.
How is this bush removed?
Is it an easy replacement job?
Anyone had experience with damage to this bush?
thanks in advance.

try this website www.toyodiy.com
click on parts reference, then select your car.

hope it helps.

thanks, i might check that out.

hows your beast going anyway?

Hello all,

Im having trouble finding an alternator with more than 60A capacity for my BJ73. Can anyone point me in the right direction?
Being a diesel, It needs to have the vacuum pump on the rear.

Thanks,
Sam.

I will check out the 2 in thomastown first.

thanks for the replies

roger that,

thanks Reddo

thanks guys

Melbourne

east west north i dont really care

Hello all,
Can anyone reccommend a TURBO installer for my
Landcruiser BJ73 3B diesel

Thanks in advance

yep, ive got some here, with the 8.8 stamped on the head.
All good.

thanks champ,

M12 Hi Tensile it is then.

Hello all,

Just after some advice in regards to bolting up a winch to a bar.
Which bolts are meant to be used here?
Hi Tensile 8.8 or not?
Why? Why not?

Thanks.

dont know what dog breath is goin on about, but this a ripper site.
thanks dj

Gday mate,

Castrol VMX 80 is the go in Toyota gearboxes.
I changed my BJ73's gear oils and found it was definately smoother shifting when cold.

Let us know how it goes.

Here is a handy diff ratio calculator for those interested... The diff ratio you need = The size of tyres you want multiplied by your current diff ratio divided by your stock tyre size . Example if you want 35's, you have 4.11's and stockys are 31's..... 35 x 4.11 / 31 = 4.64 Then you can round down ...

might sound silly, but how about buying a complete kit, copy the template and then return it with some weird ass excuse... hopefullt getting your money back.??

sounds a bit much to me...
for $850 i would expect a full swivel hub kit, wheel bearings, all leaking seals replaced and a wheel alignment. plus $100-$150 in change.

Im after some help with some handbrake issues after a 2" body lift.
The cable catches on the diff bracket when the handbrake is on. How have you guys overcome this? new bracket? cut bracket off? different handbrake?
much appreciated.

mate, a friend is helping me with a 3.5" stainless snorkel on my BJ73. I made the mistake of getting heavy guage stuff (3mm wall thickness) and it weighs alot more than i hoped. We are drilling a hole right through the A pillar and using 10x 80 long bolts with rubber bushes, i can reach in and put a ...

Not sure if this works
Never posted a pic before

http://i440.photobucket.com/albums/qq12 ... 008369.jpg

Ive got a home made steel one that im not using
but im in melbourne

Hey,


They are on ebay

http://cgi.ebay.com.au/BRAND-NEW-4WD-TY ... m153.l1262


looks like 35" for $295

Sam

jonno, what do you mean it stays on for 20 seconds? is that the light on the dash or the click you can hear under the bonnet? i too have a BJ73 and i need to glow it 3-4 times when its cold. ie: ignition on, wait till light goes off (5-6 seconds), then ignition off and back on (3-4 times). pain in ...