Outer Limits 4x4 Board

hmmm, i have 31" AT's but am looking to go to a 31" MTR and wont be going bigger than that. there was only prob 5mm to the bump stops, after the lift there is bout an inch. will going up to max destroy my CV's quickly?

thanks for the replies
steve

ok, as the title says i raised my MK torsion bars to the max. the car sits buch better now, only 15mm higher an the back now. the only thing im worried about is, will there be any stress on other parts (ball joints etc)??? i had a wheel allignment at the same time

cheers
steve

can you get them in a 31 or 32"? ive only seen 34's

ahhh, im trying to put 33 12.5's on my car so might leave it for now i know what you guys mean, fast food drive thru's are 3 point turns for me if i make it under the height limit

what is the side effects for doing this? surely its set the way it is from the factory for a reason?

nice, im keeping an eye on this one! keep us posted mate

the rims are centerline convo pro's

thats correct. 2 piece rim the dish is seperate so you can get a bigger/smaller dish. looking at $1500ish for a set brand new. guy who fixed my car had a charger, valliant and HK monaro all sittin on them.

wow, thats alot of car for $5k! bad luck mate, cant keep em all

i was going to replace it because it didnt work but when i had it serviced they fixed it i was going to put an autometer air/fuel guage (link below). it has an LED indicator and looks the goods.

http://autometer.com/cat_gaugedetail.as ... 2606&sid=7

i went to bridgestone and had a look around. they have a courier promo with 16's and equivelant tires to 32". looked very tough, also had the same torsion bar front end as mine. they are fully wound out and he said that it has taken its toll on parts and worn bushes and other components which is ...

sweeeet, the box isnt flat on the bottom, looking under the hood i found its a late 98 but couldn't find the gear box no. ironman do a suspension package that includes torsion bars. shop around a bit. i think old man emu might do them too what does these packages include, how much lift and what ...

thatnks rusty, thats great info. i spoke to a mate who works at ARB, he told me they dont do custom or modified torsions, but did say he would gladly make up som bodylift spacers to raise it 2" is it possible to modify the original torsion bars? im completely new to the torsion bar set-up and am ...

yeah, theyre big but not quite what im looking for. speaking to my brothers mate at ARB today. see what i can do

apologies if you took my comments the wrong way by no means did i mean these comments have been worthless, ive used the great info ive been provided thus far especially from yourself. by saying i wanted to be pointed in the right direction i was hoping to get someone with a past experience to put me ...

The pic is good, but look at the adjusting bolt. It's already cranked pretty tight. I don't see much more lift coming out of the t-bar without reindexing. im not sure what im looking at here im completely new to this. my previous cars have been trying to sit them as low as possible! from what i ...

great thanks for that... thats a weekend job by the looks of it but atleast i know how to get the first bit if lift. what side effects will raising the bars do, will it compremise strength/safety? will it distrupt turning or turning circle?? its bad enough as it is! do i just get a ring spanner to ...

i actually really like the offset on these wheels, is it possible to use this offset by raising the car 2.5 or 3"???

Yea you are on the wrong track... The less offset you ahve the further 'in' the wheel will will resulting in less arc when turning and going up & down leading to less rubbing. Make sense? yes, complete sense, i didnt word it right but its what i meant! :oops: with the triton offset i will still ...

At the rear of these is a thread and a lock nut. undo the lock nut and wind away. Lift the front of the vehicle off the ground makes the winding easier when you do it. Count the number of turns you do so you can do the same to each side and return it back to normal if you want. I think the biggest ...

i was under the impression that because there is no leafs or springs under the front, you couldnt do a suspension lift? is this true? i do need to lift the car but how can i do this on the MK?

hey guys, i have read all thrads posted about fitting 33's to a triton but havent learnt much as of yet. At the moment my car sits at stock height with 31" A/T's and has absolutely no issues with scrubbing at all - not even at full flex. whilst at my brothers house over the weekend we thought for a ...