Outer Limits 4x4 Board

just had the head fully recond because of valve steam seals were worn and blew heaps of smoke at idle then went away. now it blows white smoke on start up every time then goes away. never use to. ony blew smoke when left idling. when picked the car up they said it will blow smoke untill the exhaust ...

what bellhousing did people use when putting the 1uzfe in
front of the GQ 5 speed
do you have to make one or can you by them off the shelf
thanks

i now have a blue dual cab.
speak to you soon. daniel

don't be soft keep your boggers or go back to claws
you got that thing on the road yet

delete

i guess should elaborate, are you wanting to lay acrylic colour over 2k colour or you going to primer/sealer in between...this makes the diff. Also are you painting in acrylic for any other reason than its cheaper, if you have been scared off by the 2k is too hard threads don't be its simply not tr...

looks like i have to sand the panels back to steel
going to be a nice job

can you paint acrylic over 2pac
cant remember if you can or not

any one got any ideas what to do or where to get one
put in i'v done a search but couldn't find anything,
thanks

what date is this on

wheres the best place around capalaba to check them out

need to buy a battery for my 80 cruiser has dual battery's
but second one dead, i have a waceo cf110 frige freezer
that it will have to run, normally go away fotr 3 or 4 days
and run some lights now and then .
what do you think i should get theres plenty of them out there
to chose from

not sure if its a easy fix or book it in some where to get fixed
the high beam doesn't work when pushed forward like normal
but works fine when you hold it back
has any one had this problem

sorry to ask but what happened in the park?

has any one got one and kept the air con condenser,
does it get too hot from not enough air flow
i have a bigger radator
or should i go top mount

i got a set off ebay as well piece of piss only $25

x3 would be nice

have a 80 series 4.5 petrol the engine was replaced 65,000 k's ago but when we leave it idle for few minutes then rev it it blows shit load of smoke then its ok no smoke when driving, been told its valve stem seals and wont get any change out of $2000 to fix. has any one had same trouble or is it so...

Posted: Thu Jan 03, 2008 9:09 am

--------------------------------------------------------------------------------

as your last line says its a winch challenge!!!!
& last time I checked MMM,s XWC wasnt listed as MMM,s XWGPSC

if you don't like it then don,t enter easy.

its for a GQ

thanks for that i,ll give it ago!

i have a set of 2dextrem 6inch arms but want to lower it down to 4 inch .
will it still drive ok or do i have to change the arms

thanks for that very help full
cheers dan.

what type of camping frige do you own and how big is your family
thinking of getting 1 just not sure witch one
theres 2 of us and 1 baby
thanks

i have a dual battery set up just wondering if i could run a set of wire,s
to tow bar to charge another battery thats in the camper trailer from the second battery under the bonnet, is there any problems doing that
any info would be grate thanks

thanks heaps for that. very handy info.

cheers

i,v got a 110 waeco and wondering what size cable to run to the back of the wagon to run the frige i'v all ready got a dual battery under the
bonnet

theres one on here 505 hp at tires RB26 powered just got to
find some pics its in members some where