Outer Limits 4x4 Board

Racetec in dandenong make a top mount turbo manifold for tb and td42 .Was pretty pricey though $950 and an extra $400 if you wanted it ceramic coated but with that said you also have to make a custom dump pipe blah blah blah

Racetech in Dandenong Melb. make a top mount turbo manifold for td42's t2 , t3 flanges around 900 bucks.

Do it right , Do it once .bang an air locker in

i know lots of people do this but how well does the vehicle steer around corners under load with a lsd ?is it a pig to drive off road in the wet?wouldnt it push you into the corner rather than around the corner?

Racetech in Melbourne make pretty good top mount turbo manifolds for td42's for around 900 bucks .can get ceramic coated too for around 400 bucks t3 ,t2 flanges.

on the passenger side at the back of the block (near the bellhousing) there should be a provision to plumb up the water return its near the little alloy thingy(dont know what its called sorry )

my oil feed goes into the side of the block in between the passengers side engine mount all the others are the same as michael a's.ive also seen people put a T piece on the oil line for the vacuum pump on the back of the alternator .

Spring over axle, reverse shackles,78 series rear leaf pack,60 series power steering pump and box,60 series diffs (wider than 40s)offset wheels( cause 38s could rub on chassis and springs at full lock) Thats providing you still want to play with leaf springs i guess! go coils!!! ;)oh yeah the ...

Dont know if its any help but a gq box out of an 88 model measures 677mm from bellhousing to back of box (no transfer case)Cheers!