Outer Limits 4x4 Board

Hello!

HX35 or hx40 holset turbo. (water and oil option)

Anyone have use one of these on a petrol engine?
Any ideas how fast will spool or any comparison to an gt35 or 37.
I didnt find to much technical info over the inFernet.

thanks

Chris

200kw hahaha you'll drive it like that for a week and you'll be like ... "NEED MORE BOOST!!!!"

i know, i know.... everybody tell me the same thing, but i have to start with something... :) .
Cant get forged pistons...to expensive (i think).

How much boost you think can i run safe?

Here is a ...

If the Garret is scaring you for cost then stay away from turbonetics new range lots better than garrets but you pay for them trust me.

Yep, Turbonetics new GTK range, also known around the traps as GT Killers as a sly dig to Garret.
Regards Andrew.

cant get turbonetics here in chile... i will ...

deffinatly don't want gt28's they are the turbo's that i was using but i had two of them hanging off the side of my head that setup worked great for me. XR6 turbo probably a little to laggy but depends on how you drive it but a GT35/40 with a .8 ex is the go. If the Garret is scaring you for cost ...

chunderlicious wrote:those are small turbos.

you need a GT35.42r or a to4z i beieve it is.

these turbos give awsome power all through the revs.

Hi!

i have googled more info, and i believe you are completely right.
men...those thing cost almost 2.000US here in chile.
Thnaks for the tip!

Chris

Where abouts did you get your motor done? Any idea on cost?? Looking at going down the same path later on. How much better does it go now?

Hello!

Well, the cost is about 1500US (a friend of mine work at nissan and i can get the parts very cheap) , im in chile, so everything cost the double ...

Hello!

I was doing a stroker for my tb42, but its as expensive as turbocharging, so im going to use turbo :)

The motor is now balanced, crower stage 2 camshaft, springs, etc and... the question.

Turbo:

XS power: i have read in many posts that these turbos usually get destroyed.
Masterpower ...

I am also keen on boring out 4.2 to 4.5. (96 to 99.5mm from memory).
My question that noone could answer was whether the block was thick enough to go out the extra 3.5mm.
I believe the conrods are the same length and the combustion volume in the heads are the same in 4.2 and 4.5 therefore the 4.5 ...

I am also keen on boring out 4.2 to 4.5. (96 to 99.5mm from memory).
My question that noone could answer was whether the block was thick enough to go out the extra 3.5mm.
I believe the conrods are the same length and the combustion volume in the heads are the same in 4.2 and 4.5 therefore the 4.5 ...

Hello!

Im new!!!

Im re-powering my tb42 (have discard change engine for the moment - got a vh45de stored until i have the time.. and money ).

So...the thing is:

TB45 pistons and rings (first overbored size - dont remember size).
Crower camshaft (product number 61392) (has been bought, but not ...