Outer Limits 4x4 Board

Have had a ebay fan on my gq for about 3 years now no signs of any problems

cheers mate but am not looking at doing any body mods on a brand new car.

TD42 all the way Much stronger and more reliable than a ZD30.

Just about to but a brand new D22 ST-R Navara and want to find out what size tyres to get i am planing on putting a 3" x-flex snake racing lift kit in it.
standard size is 25/70 r16

I am looking at purchasing a new Navara D22 but am curious about the power output being only 98kw when the D40 with the same motor has much more. I wish to know what other people have done to bring the power output up to a more respectable level? And if anyone can explain why Nissan have "DE-Tu...

tb42 are adjustable valves sounds like you just need them adjusted pretty easy job.
think it's 14thou hot, 8 thou cold

I WANT TO DO IT FOR 2 REASON ONE IS TO GAIN MORE CLEARANCE AND MY (AFTERMARKET) AIR BOX TOUCHES THE BONNET

i am planning to do a body lift on my GQ SWB TB42 Auto i was wondering who has done one and what is involved ie. modifications etc....?

I am trying to find out where i can get some 80mm internal diameter flexible intake pipe to go from my snorkel to me air box does anyone know where i can get this.

I have non genuine mounts on my gq for some time now and have had no problems they will still do the job

get some early 80 series offset rims should do fine and 3 inches would do and/or maybe a bit of a body lift

to adjust the inner nut i just use the weight of the ratchet/spanner and then go a little bit more you don't want to go too tight and if it's too loose you will know when the wheel is attached you will get sideways play

if you are getting fuel to the carby then it must be a carby problem it will need to be rebuilt

i would fit a clear hose between the fuel primer pump and the injector pump and see if you are sucking any air through i have seen this before they can suck air through the primer.

i have a 1762ls that i have purchased on ebay and i went to fit it but it doesn't seem to line up i can't see what holes are supposed to line up and there is a little lug that it hits could someone offer some advise or even better show me a picture of one fitted

i have a 1762ls that i have purchased on ebay and i went to fit it but it doesn't seem to line up i can't see what holes are supposed to line up and there is a little lug that it hits could someone offer some advise or even better show me a picture of one fitted

i have looked at the bible and found some good info i just want to get a list of everything i will need so i can get it all and do it in one hit
thanx for the imput guys.

i want to raise my swb mav/patrol about 4-5 inches what do i need to replace/change/modify?