Outer Limits 4x4 Board

any one done a full ruf on a spoa swb
did it work any good???
drawbacks??
approx how much will it move my diff forward on a full ruf?
can I use a set of shagged now flat once 2"lifted rancho springs??
im not looking for lift

I've run "half RUF" for about 5years (spoa and spua), and full RUF since ...

Santos wrote:i
Hawk - was your SJ413 carburattor or Efi?

Mine ran first the stock aisin carb, then I changed to an older Aisin from a Toyota car (manual choke and mecanical 2:nd port) ran good with both, mabye even a bit better with the older carb.

Santos wrote:Funny enough is that suzuki don't recommend any ethanol for the sierra/sj413 here in australia

I don't have a manual for the 413 so I never knew, but I tried higher and higher concentration till it ran worse, 30-50% seemed to work fine.

All petrol that is sold here in sweden contains 5% Ethanol.

Nice to se someone else trying E85.

Ran 50/50 mix of petrol and E85 in my 413 for over a year, ran great.

Want to try this in my Vitara to, but the manual says max 10% Ethanol (tried that, no problems) thinking of changing injection points and try a bit higher concentration.

Anyone with these flares tell me who makes them and how much etc?

http://img229.imageshack.us/img229/9966/contentga4.jpg

I know Sikid has some on his White Vitara...

That's my zook. Those are Suzuki genuine ascessories (SGA) and was only available from suzuki.

They are not the same ones as ...

Here's mine, made from scrap pipe.