Outer Limits 4x4 Board

Nothing to do with the question in the post. In future if your session times out while typing a long post use the back button on the browser to go back to the text you spent ages typing. At least then you can copy paste it. Yeah I tried doing that but it came up with webpage has expired so had to ...

Sweet as! I was trying to get one of them but the shop i was at talked me into the Mach 4 telling me it was better as they didn't have the Miller DE in stock. How low have you gone down to with it? I take it you have one?

Gday Just wrote an factural esay, then it made me log in again and deleted it :bad-words: ... Big story short... On to my 3rd auto helmet now and im still burning my eyeballs when I go down to 5 - 10 amps with the TIG when they all state there good for 5 amps. What helmet works with a TIG at 5 amps ...

Sweet. I ended up using 6mm plate. But cut it slightly higher like you are talking about. 4mm gap under the door to the plate right through...
Cheers for the help

Anyone???

Ive taken the whole guard off the vehicle, still cant work out the bugger...

Cheers for the info though

Steve

G'day all,

Searched and searched but no go...

97 GQ patrol st, the aerial is on the front passenger guard. How do you take the whole unit out without an angle grinder? Just welded up the guard and need to paint it.

Cheers heaps for any help!

Steve

Anyone done this in qld?

Cheers

Steve

......

Hi all, Going to wire up the engel tomorrow for the fraser trip on wed! Going to wire it from the bat to a 30amp fuse with 6mm wire, from that to an on/off switch on the dash then out to the front of the tray with an anderson connection to the fridge. Is this the norm or is there a better way? Also ...

Anyone using the cheezy on on track 4x4 mounts? How are they?

Im thinking of doing this... My Brake vac pump is on the GQ steering box? Is this the same as the GU?

G'day, On my GQ the vac pump runs off the powersteering pump not the alternator? Whats better? And how much of a drama is it going to be to change it over to the vac pump on the back of the alternator? Ive bought a 90 amp alternator with the pump on the back of it, can I pull the pump off and run it ...

Done and works a treat! Just a Q? Instead of piggy backing the power to the switch off the 30 on the relay, I ran a wire directly from the battery via a 30amp fuse to the switch, I then ran a separate wire via another 30 amp fuse to the 30 on the relay. Just seemed the better option??? Or am I wrong ...

I don't know what the threads are? You tell me... you made em!

Thanks for the heads up though! So you rekon there's no benifit to changing them?

Cheers

Steve

Hi all,

The time has come to replace the drag link tie rod ends... Done some thinking... Can I change these to rose joints giving me less restriction? And will they be road legal? Just a thought?

Cheers for any info!

Steve

I know this is an old post but im about to do this my self. Just a thought... The positive signal from the gearbox, I only tap into this and not break the original circuit? Plus if I use 2 relays (aka 1 per light) I just join them at the switch? Ps There are no laws on brightness of reverse lamps ...

depends who does the powder coating... some of them dont cleanit properly before spraying it making flake off after a knock... Ive used black cold gal spray on my rims, no undercoating, 2 year on the rims are fuct but the paints still good. just make sure you clean all the wax and grease off ...

1 word...

WOW...

Im trying to work out the difference between them both... There both JASIC? And Im guessing the same? Ones $1450 the other is $800 give or take. If there both the same internals then I could get parts from here anyway. Thoughts??

Cheers

Steve

The UNIMIG Jasic... http://www.unimig.com.au/catalogue_product.asp?product=54&category=10&subcategory=25" onclick="window.open(this.href);return false; The Jasic... http://cgi.ebay.com/200A-AC-DC-TIG-MMA-PULSE-Welder-WSE200P-2year-warranty-/230492369837?pt=BI_Welders&hash=item35aa6a73ad" onclick ...

Im about to buy either the UNIMIG (JASIC) AC/DC 200A or the JASIC WSE200P, the unimig jasic is $1450 from total tools in syd, the Jasic is $800 to my door from china... Ive been looking at the specs there's very little difference... the unimig uses 5.8KVA and weighs 30KG, the Jasic uses 4.5KVA and ...

Nice!

Thats pretty much what I was thinking! The welder Im looking at will do the job perfect!

Cheers

Steve

Hi

Im just about to buy a TIG welder to start fabbing up a cage/tray etc...

Just wondering how many max amps people are using for welding 3mm CDW Tube with TIG??

Looking at the duty cycle of them...

Thanks heaps

Cheers

Steve

Yeah good point lads! Will give some people a call tomorrow!

Thanks heaps for the info!!!

Cheers

Steve

Hi done a search on the net but cant find anything?? I want to build a winch bar kinda like this... http://www.lukeys4x4.com/gallery.html" onclick="window.open(this.href);return false; (the white hilux BAF51W) Ive been told different stories about the hoop at the front??? Is it legal how it sticks ...

Cool! Was thinking there must be a reason why people arn't doing it. Looks like its a complete swap then!

Thanks heaps all for the info!

Cheers

Steve

Sorry... Is it possible to put GU CV's and axles in a GQ diff/axle housing? Is the GU CV bigger dia or is it longer than the GQ CV's or both?? Im pretty sure the GU axles are each 20mm longer than the GQ axles, is there a way these can be shortened? Are the internals of a front GU housing the same ...

Can it be done?? Ie GU inner swivel hub axle seals??

Love Ke70: Looks the goods! Have sent them an email for some more info.

Bad JuJu: What pump are you running atm?

Thanks heaps for the info lads!!

Cheers

Steve